summaryrefslogtreecommitdiffstats
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* Fix SHA1 calculation on big-endian systemsLukas Fleischer2022-03-111-0/+1
| | | | | | | | | Add the AC_C_BIGENDIAN macro to determine endianness and set WORDS_BIGENDIAN accordingly. Fixes GitHub issue #397. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Make Home/End keys work as expected in text input modenobody2021-08-071-0/+2
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* First day of week can now be any dayMorgan Seltzer2021-08-073-10/+16
| | | | | | | | | | | | | Previously only Sunday and Monday were allowed as the first day of the week, and this was internally treated as a binary variable. This patch allows for users to change the first day of the week to any day. Addresses GitHub feature request #321. Signed-off-by: Morgan Seltzer <MorganSeltzer000@gmail.com> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Backend changes for first day of weekMorgan Seltzer2021-08-076-81/+82
| | | | | | | | | | | | | Previously only Sunday and Monday were allowed for the first day of the week, and was internally treated as a binary variable. This patch changes the backend so all days are accepted, a future patch will allow users to actually select other days. Addresses GitHub feature request #321. Signed-off-by: Morgan Seltzer <MorganSeltzer000@gmail.com> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fixed sidebar config sometime not increasing widthMorgan Seltzer2021-08-072-1/+3
| | | | | | | | | | | | | | The sidebar has a numerical mimumum width that is statically defined, and users may set the width of the sidebar in config by incrementing the percentage of the screen between this minimum and a maximum value of 50%. However, internally the mimimum percentage could be set as low as zero, and while that did not decrease the sidebar size below the numerical minimum width, did mean that between 0 and the mimimum width increasing the percentage had no visual effect to indicate change. Now the mimimum percent is not decremented below the mimimum width. Signed-off-by: Morgan Seltzer <MorganSeltzer000@gmail.com> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Allow configuration of appointment time formatmercurialmoon2021-04-115-8/+32
| | | | | | | | | | Added the option to configure the format in which appointment time is displayed. The setting is called "format.appointmenttime" under the general settings menu. Setting defaults to previous behavior, which was "%H:%M". Signed-off-by: mercurialmoon <mercurialmoon@protonmail.com> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add generic-prev-view key bindingAurora2021-04-115-0/+27
| | | | | | | This can be used to cycle backwards through windows (similarly to generic-change-view). Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Allow undefined actions in keys configuration fileLars Henriksen2021-04-115-252/+327
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the keys file there are three possibilities for each action: 1. One or several keys are assigned to it 2. It is marked as UNDEFINED (new) 3. It is missing from the file On load of the keys file, calcurse respectively 1. Assigns the key(s) 2. Assigns "UNDEFINED" (new) 3. Assigns a default key if possible If default keys were assigned, the user is informed of the number of actions affected, and the keys file is updated. After load each action must either have keys assigned or be undefined. If not, calcurse exits with a failure. If there are syntax/semantic errors in the file, calcurse rejects the file and exits. When an interactive user leaves the keys configuration menu, a warning is issued if any action is UNDEFINED. The keys file is always updated. Addresses GitHub issue #298. Additionally: Description of concepts and data structures used for keyboard keys and virtual keys (actions) as well as name changes and comments to improve readability. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Call setsid() for hook/notification commandsLukas Fleischer2021-04-047-12/+19
| | | | | | | | | We do not want hook or notification commands to interact with the terminal in any way. Create a new session for them. Addresses GitHub issue #326. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Redirect standard descriptors for hook/notify commandsLukas Fleischer2021-04-043-26/+11
| | | | | | | | | | | | | Disconnect stdin, stdout and stderr when running an external hook or notification command. The previous solution of appending "<&- >&- 2>&-" to the shell command line does not work if the command includes pipes. Use shell_exec() in notify_launch_cmd() instead of a custom (and incomplete) reimplementation of that command. Partially addresses GitHub issue #326. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add parameter to redirect stderr to shell_exec()Lukas Fleischer2021-04-046-18/+37
| | | | | | | Add a function parameter to allows redirecting stderr in addition to stdin and stdout. The parameter will be used with a follow-up change. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Todo resort() optimizationLars Henriksen2021-01-311-3/+1
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Keep a linked list sortedLars Henriksen2021-01-163-59/+148
| | | | | | | | | | | | | | | | | | | | | | | | A general linked list function, llist_reorder(), is introduced that will reorder a list after a list element has changed. Some refactoring to avoid code dupliction. Background The four linked lists of appointment panel items (appointments, recurring appointments, events, recurring events) are kept sorted by inserting elements in order, either when they are first loaded from disk or when new are added. The ordering is by start time (numerical) and description (alphabetical). The user is allowed to change start time as well as description. A change is committed directly to the list item (unlike cut/paste where an item is deleted and then inserted). This may break the order. The order property is used when events are loaded from the evenlist into the day_item vector, see LLIST_FIND_FOREACH_CONT, and when looking for the next upcoming appointment, see apoint_check_next(). Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* docs: fix simple typo, mulitple -> multipleTim Gates2020-12-191-1/+1
| | | | | | | | There is a small typo in src/wins.c. Should read `multiple` rather than `mulitple`. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Improve performance of recur_prev_occurrence()Lars Henriksen2020-12-193-13/+19
| | | | | | | And fix item start day for prev command Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Introduce macro DAYLars Henriksen2020-12-198-39/+32
| | | | | | | DAY(t) is midnight (the day) of time_t t. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix parsing of UNTIL in iCal importLars Henriksen2020-12-191-3/+10
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Do not remove an empty note file after edit sessionLars Henriksen2020-11-154-21/+4
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Avoid double free on iCal import errorsLukas Fleischer2020-11-071-2/+13
| | | | | | | Set pointers to NULL after calling free() to prevent double free on cleanup. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Return failure if import skips any itemLars Henriksen2020-11-073-8/+13
| | | | | | | | | Other items may have been imported succesfully. Adresses Github issue #323, last part. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Make iCal event import independent of property orderingLars Henriksen2020-11-071-122/+135
| | | | | | | | | | Refactoring of ical.c: properties DTSTART, DTEND, DURATION, RRULE and EXDATE are saved and only processed after encountering END:VEVENT. Adresses Github issue #323, follow-up question. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Use dynamically allocated string in struct io_fileLukas Fleischer2020-10-112-2/+3
| | | | | | Avoid using fixed-size buffers and strncpy(). Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Implemented rendering of notes in events/appts as wellAmbika Eshwar2020-10-111-4/+38
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Implemented rendering of notes in todo viewAmbika Eshwar2020-10-113-1/+33
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix memory leak in run_hook()Lukas Fleischer2020-10-111-4/+5
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Redesign the item deletion menuLukas Fleischer2020-10-111-58/+66
| | | | | | | | | | | | | | | | | | | Instead of the previous inconsistent and potentially nested menus, the following message is now displayed when deleting an item: Delete (s)elected occurrence, (a)ll occurrences, or only the (n)ote? Options that are not available (e.g. because the item is not recurrent or does not have a note) are omitted. For a non-recurrent item without a note the message becomes Delete (s)elected occurrence? and is skipped if general.confirmdelete is disabled. Implements GitHub feature request #308. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add p(revious) commandLars Henriksen2020-10-113-3/+74
| | | | | | | | | | The p(rev) command finds the previous occurrence of a recurrent item, analogous to the n(ext) command. A bug in the next command is corrected.. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Replace 'ical_rpt_t' with 'struct rpt'Lars Henriksen2020-10-071-113/+71
| | | | | | | | Refactoring and simplification only, no functional change. All error checking and logging done before call of ical_store_event/apoint(). Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Always exit with failure in case of option parsing errorsLars Henriksen2020-10-071-14/+9
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Extend icalendar exportLars Henriksen2020-08-261-82/+219
| | | | | | | | Export now covers advanced recurrence rules and properties imported to a note file. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Update use of note file for importLars Henriksen2020-08-261-62/+8
| | | | | | | | | | | Removes the parts of commit 'Extend use of note file for ical import' that relate to STATUS. The STATUS property is (partly) supported for todos already. Corrects insertion of a separator: always insert it before imported properties (also when there is no description). Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Improve event text for cancelled periodic saveLars Henriksen2020-07-261-1/+2
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Revert "Interrupt periodic save when launching process"Lars Henriksen2020-07-261-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 0f3d198 (Interrupt periodic save when launching process, 2017-09-08). Stopping and starting periodic save when external/hook programs are run causes deadlocks. The periodic save thread cannot be stopped/started at will, but should be started once and run uninterrupted as long as calcurse runs. Only if the configuration parameter is changed, must the thread be stopped and possibly restarted. The reasons are - the start routine unconditionally starts a thread. - the mechanism used to detect whether a thread is running or not, is designed to be used by the main calcurse thread only and with only one running thread of each kind (the thread ID of each running thread is kept in a variable; if the thread is not running, the variable has the main thread ID as value). Any load hook will be run at the initial dataload, and the stop/start calls will start a perodic save thread (this is true for the notify thread as well). Later when threads are started, a second periodic save thread is started (for the notify thread, a running thread is stopped before restart). When hooks are run by the periodic save thread, the stop call breaks down, leading to two running save threads (if not the case already) and subsequently to a deadlock when one thread tries to stop the other. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Run hooks quietlyLars Henriksen2020-07-261-15/+20
| | | | | | | | Hooks should not be run like external programs, but like load and save operations that do not take possession of the terminal. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Remove SIGCHLD signal handlerLars Henriksen2020-07-264-19/+17
| | | | | | | | | | | | | | The purpose is to make child_wait() reliable. The handler is meant for the notify main thread, but signal handlers are shared by all threads. In the calcurse main thread and the periodic save thread (hooks) the handler and child_wait() will compete (if the signal handler kicks in first, the waitpid() call in child_wait() will fail with errno ECHILD). All child processes in the main thread, the notify thread, the periodic save thread and the notify demon are explicitly waited for. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix configuration menu 'Quit' actionLars Henriksen2020-06-211-1/+4
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Improve help texts for recurrence rulesLars Henriksen2020-06-131-15/+15
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Remove systemdialogs option from configurationLars Henriksen2020-06-138-51/+9
| | | | | | | | | The option controls the welcome window and the export/import result messages. The former is dropped. The latter are now always displayed unless calcurse is invoked with the "quiet" option (-q). Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Allow repeat count input (for until) in interactive UILars Henriksen2020-06-133-18/+48
| | | | | | | | | | Shortened repetition type text. Avoid "duration" in until-contexts (reserve it for appointment duration): "duration" changed to "increment" in user texts as well as source. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Extend import of recurrence rulesLars Henriksen2020-06-133-25/+192
| | | | | | | | Support has been implemented for recurrence rule parts BYMONTH, BYMONTHDAY and BYDAY. A new test has been added. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Update import of basic recurrence rulesLars Henriksen2020-06-133-122/+208
| | | | | | | | | | | | | | | | | | | Conversion of COUNT to UNTIL was a simple calculation which assumed one repetiton per period (day, week, month or year); it does not take exception days and invalid dates into account. Solved by a new function which returns the n'th occurrence of a recurrence rule. In calcurse UNTIL is interpreted as a day (DATE), in RFC 5545 as a time of day (DATE-TIME). This has implications when a recurrence rule has an occurrence on the UNTIL day, see comment in ical.c An "Import:" note is added when a multi-day event is imported and turned into a calcurse all-day event. Icalendar quotes in comments have been updated to RFC 5545. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Support import of time zones (RFC 5545)Lars Henriksen2020-06-133-44/+99
| | | | | | | | | The property parameter time zone identifier (TZID) is recognized in DTSTART, DTEND and EXDATE and the DATE-TIME value converted to a local time. The time zone identifier is logged in the note file. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Let RETURN set frequency type to current value in repeat command UILars Henriksen2020-05-242-13/+19
| | | | | | | In addition, the prompt text is shortened. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Include start day in error message for recurrence ruleLars Henriksen2020-05-244-12/+36
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix "next occurrence" for multi-day appointmentsLars Henriksen2020-05-241-6/+9
| | | | | | | Better name: day for occur. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix recurrence rule expansion with ordered weekdayLars Henriksen2020-05-121-20/+43
| | | | | | | | | | | | | | When the order of a weekday in BYDAY rule expansion (like -5SA or 5SU for monthly or 55WE for yearly) exceeds the number of available weekdays in the period (month or year), rule expansion with negative order could result in a floating point exception. The reason: the modified frequency might become zero. Solution. Check order against number of available weekdays and terminate expansion early whenever possible (also for positive orders). Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Take value data type of event start into account in iCal import/exportLars Henriksen2020-05-031-73/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch derives the item type (appointment or event) from the DTSTART value type. It is then used to perform an extended check of date/time values and reject non-conformant import files (like those reported in Github issues #81, (calcurse) events. The patch includes parsing and code corrections and minor refactoring. Background: Ical events are of two types, in calcurse called appointments and events. RFC 5545 has no distinguishing names for them, but describes them in section 3.6.1. The event type is derived from the value type of the DTSTART property. The value type may be either DATE-TIME (appointment) or DATE (event). If not specified by a VALUE property parameter in DTSTART, the default value type is DATE-TIME. The value type must be set explicitly to DATE to get an event. Other properties and rrule parts must agree with the DTSTART value type (DTEND, DURATION, EXDATE and UNTIL). Previously the type of an imported event was derived from the format of the DTSTART value. The DTSTART value type was not taken into account when importing, and not specified for recurring events when exporting (commit 0114289 solved it for events, see GitHub PR #97). Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Support interactive test of recurrence rule extensionsLars Henriksen2020-04-283-1/+68
| | | | | | | The generic command 'next' is introduced. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Help for recurrence rule extensionsLars Henriksen2020-04-281-29/+126
| | | | | | | | | | | The help command has been updated for "repeat". Context dependent, very terse information is built into the repeat command (edit command) for display in the status bar when editing the Weekdays, Months and Monthdays lists. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Treat recurrent events and appointments alikeLars Henriksen2020-04-281-1/+1
| | | | | | | | | | | | | | | | | | | | | The day vector (or "day_items" vector) is used to load the appointments panel with "day_items" (captions, appointments, events). A multi-day appointment has several "day_items" in the day vector. This may also be the case for a recurring item. The day_item structure has a member "start", which for day_items for recurring appointments is set to the occurrence found by recur_item_find_occurrence(), and is used to tell days of a multi-day appointment apart. For day_items for recurring events it was set to "day" of the recur_event structure (the same value for all occurrences) and not used. The value is now the occurrence found by recur_event_find_occurrence(). The patch is backwards compatible and future-proof. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-14 16:37:23 +0000