summaryrefslogtreecommitdiffstats
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* Fix sidebar width to accommodate calendar week columnLars Henriksen2019-05-282-5/+3
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix missing calculation of number of days on resizeLars Henriksen2019-05-281-0/+4
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Automate the calculation of number of days to loadLars Henriksen2019-05-264-13/+20
| | | | | | | | | | | | Instead of having the user tell how many days to load, calcurse can calculate an overestimation from the running configuration (panel size, appearance of headers and separators etc.) The configuration variable conf.multiple_days is turned into a Boolean that switches the feature on and off. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Make separation of days conspicuousLars Henriksen2019-05-266-34/+60
| | | | | | | | | | | | | | | ... by adding a horizontal line from border to border above the day heading and turning the event separator into an empty line. The horizontal line is left out for the first day loaded. Also reduce the number of empty lines at the end of a day to at most one. A new configuration variable, header_line, turns the horizontal line on and off. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Derive selected day from selected itemLars Henriksen2019-05-226-13/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, with only one day visible at a time, the appointments panel displayed the details of the day selected in the calendar (slctd_day); information required for operations on items (day_items) can often be derived from the selected day. The items available are derived from the selected day. In particular, the selected item is derived from the selected day. With multiple days in the APP panel, the relation between selected day (in the calendar) and the selected item (in the APP panel) has, in a way, been turned around. The selected item may now be moved between days without explicitly changing the selected day. Implicitly it is changed when the target day of a move is unavailable. This commit draws the full consequence: the selected day in the calendar is always (set to) the day of the selected item in the APP panel. The static variable 'struct date slctd_day' lives in ui_calendar.c and is accessible through various public functions. To these are added ui_calendar_set_slctd_day() which sets slctd_day directly. The selected day retains its significance for load of the day vector (in day_store_items()): the range of loaded days begins with the selected day. Movements (up/down) in the APP panel will change the selected day as the selected item moves among the already loaded days. Only when the target of a movement is unreachable, will further days be loaded. On the other hand, if the same range of days must be reloaded because of a changed item, the selected item - and with it the selected day - must be reset to the first day item (see do_storage()). Movements in the calendar (generic-next-day, etc.) are not affected and behave as previously, i.e. they will cause a range of days to be loaded with the selected day as the first and the selected item as the first of the selected day. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add configuration variables for multiple daysLars Henriksen2019-05-226-8/+64
| | | | | | | | | | | | | | | The number of days displayed in the APP panel has been made configurable, maximum 21 days, default seven days. With several days in the APP panel, it may be desirable to "squeeze" the entries by leaving out the final empty line of each appointment and lower the number of lines between consecutive days (0, 1, or 2). Both are made general configuration options. To make a uniform display, an empty line is added to a day without appointments, if appointments have an empty line. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add week numbers in the calendar and full first and last weekLars Henriksen2019-05-225-96/+165
| | | | | | | | | | | | | | | | | | | | | | | | | Much in the calendar is based on the selected day, struct date slctd_day, in ui-calendar.c. On the screen it is highlighted with a deviating colour. The highlight effect has been changed to a pair of red square brackets that do not obscure the day colour. The week number (in the frame) used to be that of the selected day, but has no obvious relation to the days in the APP panel. It has been replaced by the year day number of the selected day. The week numbers of all visible weeks are displayed to the left of the calendar. Dates are displayed also for the overlapping parts of the first and last week of the month (which do not belong to the month). Days are accessible in the appointments panel as well as in the calendar. Hence, validation of days (= inside UNIX time limits) must be extended from the calendar (in ui_calendar_move()) to include loaded days (in day_store_items()). Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Implement scrolling in the appointments panelLars Henriksen2019-05-224-21/+121
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With multiple days in the APP panel, up/down movements should change behaviour at the top and bottom of the list displayed, and load the previous/next lot of days. This requires that the move function returns the result of the operation. Furthermore, the ability to move the selection to the beginning of a day is needed when moving down (in order to move from the first day to the last day). For this reason a DAY_SEPARATOR has been inserted also after the last day of a lot. Appointments have a listbox height of three to separate them clearly when there is more than one in a day. This leaves a spurious empty line at the end of a day with appointments. The DAY_SEPARATOR height is reduced from two to one, and a new EMPTY_SEPARATOR of height one is inserted in any day with only events. When scrolling up the DAY_HEADING becomes visible when the selection reaches the first item of the day. The length of the separator (between events and appointments) is adjusted to leave a space to the window border at both ends, thereby making it a part of the day, not a separation between days. The dummy event must also be recognisable when not the selected item and is only inserted in interactive mode. The test for a saved selection must also recognise caption items which have item pointer NULL. The function day_get_nb() has been renamed day_get_days(). Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Redesign selected-item implementation for the APP panelLars Henriksen2019-05-224-85/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The day vector, day_items, is displayed in the appointments panel; the selected day_item object is highlighted (when the panel has the focus). When items are inserted, edited, moved etc., and when the day is changed, the day vector is rebuilt and displayed anew. Problem: How shall the selection be set automatically in the context of the new day vector? In previous versions all of the above is mostly handled by the function do_storage() in calcurse.c The function saves data about the selection as needed, rebuilds the day vector, loads the listbox and sets the selection from the saved selection data. This works well in "single day" calcurse in cases where the selected item is present in the day vector both before and after the rebuild, or when the item ordering in the listbox is unaffected by the changes. But when a new item is added the selection cannot be set to the new object by do_storage(). Instead the necessary operations are performed by ui_day_item_add(), and do_storage() is bypassed. In general, when an item cannot be found in the new vector, the item which occupies the old place in the list gets selected, e.g. when an item is deleted. When an item is turned into a repeating one, the old item is deleted and a new is created. Here the new selection is not always the affected item, but in any case not far away. Generally, with only one day in the panel an erronous selection might not be noticed or be accurate by chance. In "multiple day" calcurse the existing scheme works less well; in addition the day vector may now contain more than one object that refer to the same event or appointment (recurrent items or multi-day appointments). The scheme has therefore been modified. The do_storage() function is no longer bypassed, but handles day vector rebuild, load of listbox and item selection exclusively. To make that possible, data about the selected item is no longer saved in a local automatic variable, private to do_storage(), but in an external static variable in day.c, which may be set not only by do_storage(). The variable is declared as static struct day_item sel_data; and used as follows: 1. On startup sel_data is initialized to empty (i.e. no selection). 2. In any operation involving the appointments panel: 2.1 Do the work and if necessary set sel_data. This is the case when deleting, adding or pasting an item, and when turning an ordinary item into a recurrent one. 2.2 Call do_storage(). 3. In do_storage(): 3.1 If sel_data is empty, set it to the current selection. 3.2 Rebuild the day vector. 3.3 Set the selection from sel_data. 3.4 Set sel_data to empty. Further remarks --------------- The selection is found in the new day vector by searching for the saved (order, item.<pointer>) pair. Previously the item.<pointer> alone sufficed and in some cases it still does. In case the item cannot be found, the selection stays in the same day as before the rebuild. An attempt at more consistently named APP-related functions has led to: ui_day_sel_date() replaces ui_day_sel_day() ui_day_get_sel() replaces ui_day_selitem() Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Introduce multiple days in the appointments panelLars Henriksen2019-05-226-49/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Overview of existing implementation ----------------------------------- The APP panel displays the 'day_items' vector in the 'lb_apt' listbox. A listbox consists of a scrollwin (structure) in which a number of items is displayed. The listbox keeps track of: - the number of items - the selected item - the type of each item in an array type[] - the height of each item (ie. how many screen lines) in an array ch[] - how to display an item (on the screen) The latter three are handled by functions fn_type(), fn_height(), fn_draw(). The first two are used to fill in the corresponding array entry, type[] or ch[], for item number i, the third draws item number i. The items are taken from the global variables vector_t day_items int day_items_nb in day.c. Items include captions (DAY_HEADING, DAY_SEPARATOR). Everything is sorted for display (DAY_HEADING, events, DAY_SEPARATOR, appts). These are filled in ("stored") [by day_store_items() for the selected day in the calendar], before being "loaded" into the listbox. See do_storage() in calcurse.c and ui_day_item_add() in ui-day.c. New APP panel design -------------------- Several days are displayed in the APP panel by loading them with day_store_items(). With several days come several headings and separators. DAY_SEPARATOR is reinterpreted to separate days, and a new separator, EVNT_SEPARATOR, separates events from appointments. To sort everything, an 'order' member of type time_t is added to the day_item structure. It is set for headings and separators as well as for appointments and events as follows: item order --------------------- DAY_HEADING BGNOFDAY (= midnight) EVNT_SEPARATOR BGNOFDAY DAY_SEPARATOR ENDOFDAY event start time (midnight) appointment start time (first day) BGNOFDAY (following days, if any) The sort function day_cmp() (used by vector_sort) is extended to sort by order first. The order field always indicates the day to which an item belongs. This comes in handy, because with several days in the APP panel it is necessary to distinguish between the selected day in the calendar and the selected day in the APP panel. This raises the question which day should actions (commands) operate on: the one selected in the calendar or the one selected in the APP panel? Unquestionably the one on the APP panel which is the one tacitly implied. In most cases it is not a problem, though, because actions work on the selected item and the selected day does not come into play. But in some cases it does: delete item When deleting an occurrence of a repeated item, the selected day is the exception day to add. view item day_popup_item() needs the day of the selected item for display of correct start/end times. cut/paste item Paste needs the selected day in which to paste. add item The day of the new item is taken from the calendar. Instead a dummy event is inserted in an empty day. This makes the day selectable, which is otherwise impossible with only the DAY_HEADING displayed. The dummy event is selectable but cannot be edited or deleted (but viewed or piped). With more than one day in the day_items vecter, an appointment spanning more than one day may occur more than once in the vector (with start/end times suitably adjusted for display). A day_item is no longer (always) identified by the aptev_ptr (item) value. Instead the combination (order, item.<ptr>) is used; order is roughly the day. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Simplify day storageLars Henriksen2019-05-226-44/+15
| | | | | | | | | | | The function day_process_storage() is a wrapper for day_store_items(). It has an unused second argument, and is only used twice to load the selected day. It has been removed. A new function, get_slctd_day(), is the equivalant of get_today() and replaces the very awkwardly named ui_calendar_get_slctd_day_sec(). Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix initialization of the day_items vectorLars Henriksen2019-05-221-0/+1
| | | | | | | | | | | | | | | | This patch fixes all failings tests, but one, in PR #193. Until now the missing initialization of day_items_nb has caused no problems, because the variable was assigned to (=) before being used. In the Multiple days implementation it is repeatedly increased (+=) in a loop without being initialized first. Indeed, this may considered an easily fixed bug. But the initialization really belongs in day_init_vector() so that the call day_item_count(0) returns 0 if done right after the call day_init_vector(). The bug only shows up in command line mode because day_items_nb is not used in interactive mode. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Refactor listbox codeLars Henriksen2019-05-223-40/+49
| | | | | | | | | | | | | | | | | | | | | | | | | The changes are related to the selected item and the visible lines in the scroll window viewport. In particular, the function listbox_fix_visible_region() has been eliminated, and functions previously only called by it have been removed. It performed several tasks that are now elsewhere. One was removed in an earlier commit (scroll window pad improvement). The task of making a multi-line item visible has been moved to listbox_item_in_view(). The task of making a caption line above a text line visible is listbox specific (for the ap_list) and will be moved to ui_day_sel_move(), where it is needed. Boundary checks for the listbox selection have been moved to listbox_fix_sel(). For future use listbox_sel_move() returns success or failure. The function wins_scrollwin_ensure_visible() has been renamed wins_scrollwin_in_view(). Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Improve scroll window padLars Henriksen2019-05-224-24/+16
| | | | | | | | | | | | | | | | | | | A scroll window consists of a pad to write on, and a window through which to view the pad, the viewport. The pad may change in size when new contents are loaded into the scroll window. If so, the pad size is set with wins_scrollwin_set_linecount(). But the offset into the pad (the top line to be displayed in the viewport) is not adjusted, although it may not be appropriate for the new pad size. The same is the case when a scroll window is resized and the viewport changes size. This is probably the cause of the problem solved by commit 0b46ad4, Avoid blank space after the last list box item, and the fix has been removed. The wins_scrollwin_set_linecount() has been renamed wins_scrollwin_set_pad() and sets size as well as offset. The offset is only changed if necessary. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Impossible dates in recurrence rulesLars Henriksen2019-05-201-0/+12
| | | | | | | | | | | | | | | According to RFC 5545 dates like 30 February and 31 June must be ignored when derived from a recurrence rule. calcurse relies on mktime() "normalization" of dates (e.g. turning 32 December 2019 into 1 January 2020 when moving from 31 December to the next day). Normalization may also lead to impossible dates in monthly and yearly recurrence rules, and this must be avoided. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix display of time left before next appointmentLars Henriksen2019-04-132-7/+12
| | | | | | | | | | | | | | | | | | In the notify bar, the clock is shown in hours, minutes and seconds, whereas the time left to the next appointment is shown in hours and minutes only. When you read the clock in hours and minutes (discarding the seconds), you are mentally rounding down to the nearest minute. To agree with that reading, the time left (in seconds) should be (programmatically) rounded up to the nearest minute for display. In that way the time left is counted down whenever the minute "hand" of the clock "ticks", and reaches zero when the clock reaches the time of the next appointment, not one minute before. Also, the clock (in hours and minutes) and the time left always add up to the time of the next appointment. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix daemon notification for short warning periodsLars Henriksen2019-04-131-2/+3
| | | | | | | | | | | | When the warning period for notifications is less than 60 seconds (DAEMON_SLEEP_TIME), the daemon may be at sleep when the appointment comes up. If that happens, no notification is launched. In stead, the daemon should launch the notification early. Addresses GitHub issue #204, part 2. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix one-second warning period for notificationsLars Henriksen2019-04-132-2/+2
| | | | | | | Adresses GitHub issue #204, the interactive part. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Use ICALDATETIMEFMT for EXDATEHenrik Grimler2019-04-131-2/+2
| | | | | | Some servers (Radicale) cannot handle YYYYMM. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Avoid deadlock in config_save()Lars Henriksen2019-03-211-7/+8
| | | | | | | | | Must not exit with nbar.mutex locked. Addresses GitHub issue #201. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix calendar (re)drawLars Henriksen2019-03-131-10/+4
| | | | | | | | | Window erasure is moved to the drawing functions. Adresses GitHub issue #196. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix vector_remove()Lars Henriksen2019-03-131-1/+1
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Change -C and -D long option namesvxid2019-03-131-2/+6
| | | | | | | | | | The config dir long option has been changed from --conf to --confdir. The data dir long option has been changed from --directory to --datadir. Both old options are kept for backward compatibility but are removed from the manual. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* View or edit exception days of a recurrent itemLars Henriksen2019-02-283-1/+72
| | | | | | | | | | | | The exception days are presented for viewing/editing as a string of space-separated dates (in the user-preferred input format). After editing the string is checked for valid dates, but there is no check that a date is meaningful (an occurrence day of the item between start day and until day). Although possible, it is best to add exception days in the usual way by deletion of occurrences. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix empty dynamic stringLars Henriksen2019-02-281-0/+1
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Check for KEY_ENTER in getstring()Lukas Fleischer2019-02-101-1/+2
| | | | | | | | In some cases (e.g., TERM=pccon0) wgetch(3) can return KEY_ENTER instead of '\n' when the return key is pressed, causing getstring() to fail. Suggested-by: Mikolaj Kucharski <mikolaj@kucharski.name> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Use portable default day heading formatLukas Fleischer2019-02-101-1/+1
| | | | | | | | The %-d format string is not standards-compliant. Use %e instead. Reported-by: Mikolaj Kucharski <mikolaj@kucharski.name> Suggested-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Close stream after exporting iCal itemcrvs2019-02-041-0/+1
| | | | | | Fixes GitHub issue #178. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Invalidate calendar cache when adding an exceptionLukas Fleischer2019-02-021-1/+3
| | | | | | | Removing an occurrence of a recurrent item can turn a busy day into a free day. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix deletion of a multi-day recurrent appointmentLars Henriksen2019-02-021-2/+11
| | | | | | | | | | When the selected day in the calendar is a continuation day (not the first day) of such an appointment, deleting the occurrence does not work. The reason is that the selected day, and not the first day of the occurrence, is added as an exception day. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Refactor keys_format_label()Lukas Fleischer2019-01-191-24/+9
| | | | | | | Simplify the key formatting function and enforce display width properly using the UTF8 chopping function. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Bind RETURN to view-item by defaultLukas Fleischer2019-01-191-2/+2
| | | | | | | | | Also, use the modern key name instead of the backwards compatibility name. Addresses GitHub issue #168. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Overflow check for 32-bit types onlyLars Henriksen2019-01-183-14/+47
| | | | | | | Included is a check of the 'until' date for pasted recurrent items. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Use time_t for system time valuesLukas Fleischer2019-01-149-129/+129
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Legalese for queue.cLars Henriksen2019-01-121-0/+36
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix next recurring appointmentLars Henriksen2019-01-113-27/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Recurring appointments do not show up in the notification bar as next appointment. This was partly corrected by 2084f35 (Fix notification of recurrent appointments, 2017-02-09) and 5aa7a09 (Fix another error in the notification code, 2017-02-11). The search function recur_apoint_starts_before() had a wrong second argument, but is really of no use: the start time of a recurring appointment is the start time of the very first occurrence (in the past). A comparison against the item in the notify_app structure tells nothing of the start time of the current day; at most it eliminates some future recurring appointments. The function can be dropped, and the entire recurring appointment list looked through. The proper start time is found in the main search loop (and called real_recur_start_time) and must be compared against the item in the notify_app structure. But because recur_apoint_find_occurrence() is limited to a particular day (second argument), two searches are necessary to cover 24 hours. Unrelated cleanups: removed function return value; changed long to time_t. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Initialize data paths once onlyLars Henriksen2019-01-081-2/+3
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Explicit calendar and todo view configurationLars Henriksen2019-01-074-22/+66
| | | | | | | | | | | | | | | | | | | The configuration settings for calendar view (monthly/weekly) and todo view (hide/show completed) used to be saved automatically on calcurse exit, with values taken from the current interactive settings. They could not be set explicitly in the configuration menues. Configuration settings are no longer saved on program exit, but on exit from the configuration menu. This means that the saved values are those that were current when the configuration menu was entered. To change a saved value, you must set the view as desired and then enter/exit the configuration menu. The preferred calendar and todo views are no longer automatically taken from the interactive settings, but are explicitly set in the general options menu. Default values are monthly view and hide completed view. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Purge option glorifiedLars Henriksen2019-01-071-4/+7
| | | | | | | | | | | | | | The invert filter option is automatically set for -P (and cannot be used on the command line). The intention is that the grep option (-G) is used to find the items that should be removed. To remove them, the same command is run with -P instead of -G. In general, purge will remove matching items (silently). Backward compatibility for option -F (no invert filter). Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Filter option: invertLars Henriksen2019-01-076-121/+128
| | | | | | | | | | | | | New filter option: --filter-invert. When present it inverts (negates) the other filter options combined. This is mostly useful with the -G option (with -Q the output is limited by the query range (day range)). The ouput from "calcurse -G <filter options>" is the (set) complement of "calcurse -G <filter options> --filter-invert". Here <filter options> may be any combination of filter options. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* CLI: detect conflicting filter optionsLars Henriksen2019-01-071-0/+37
| | | | | | | | Several start/end-time filter options set the same filter criterion. Only allow one such filter option at a time. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* CLI: Revert to and update of parse_datetimearg()Lars Henriksen2019-01-073-54/+106
| | | | | | | | | | | | | | | | | | | | | An earlier commit ("CLI: take input date format from configuration file, do not accept time") replaced parse_datetimearg() with parse_datearg() and eliminated time-of-day from command line date arguments. This made the full use of filter options impossible. That earlier commit is reverted and updated. The parse_datearg() function is replaced by an updated parse_datetimearg() function that - takes the date format from the configuration file - accepts date, date-time or time The updated parse_datetimearg() function has been extended to report back the type of the date string received in order to set (filter) options correctly. Input dates for query ranges (--from, --to, --days) are still limited to dates only. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Safety exit and read-only modeLars Henriksen2019-01-071-18/+35
| | | | | | | | | | | | | | | | | | | The key_generic_command() function provides a "safety exit" in case of online changes that should be dropped at exit when auto_save is on, or (NEW) should be saved at exit when in read-only mode. A check for unsaved changes has been added. The command prompt has been extended with minimal help information. After commit 05e0fd0 "Quit, autosave and interactive save" you could not leave calcurse in read-only mode with the quit command because the key_generic_quit() function interpreted IO_SAVE_CANCEL as a decision (by the user) to cancel a save-conflict and cancelled the quit as well. Now the function will quit unconditionally in read-only mode (as stated in the man page). In normal mode a check for unsaved changes has been added in case auto-save is off. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix print_date()Lars Henriksen2019-01-071-5/+8
| | | | | | | | In print_date(date, day, ...) it is silently assumed that day is midnight (beginning) of the day to be printed. Assume only that it belongs to the day. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* CLI: do not start daemon if calcurse is runningLars Henriksen2019-01-071-1/+3
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* CLI: filter options have no effect for dates before the epochLars Henriksen2019-01-073-16/+16
| | | | | | | | | | | | | | | | With the exception of filter.type_mask, a filter is only applied if set explicitly on the command line with a filter option. Whether that is the case, is determined by comparison with the initialization value. For date related filters (start_from/to, end_from/to) that is -1, hence the criterion is != -1, not >= 0. In generel, a filter initialization value should be invalid (i.e. one that cannot be set explicitly). As times before the epoch (1 January 1970 00:00:00 UTC) are negative, -1 is a valid Unix time. However, as it cannot be set from the command line, it is probably no problem? Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* CLI: time assignments for filter optionsLars Henriksen2019-01-071-4/+21
| | | | | | | | | | | | | | | | | | | | | Explanation. There is an important difference between "to <date>" (e.g. to 15/11/2018) and "to <date time>" (e.g. to "15/11/2018 13:30"): <date> is a time span (of 24 hours), while <date time> is a point in time. "To <date>" really means "to the end of <date>", while "before <date>" means "before the beginning of <date>". There are 24 hours between the two, whereas there is only one second between "before <date time>" and "to <date time>". Similar for from/after. An earlier commit introduced parse_datearg() that only accepts a date without a time. Hence, a date should be treated as a time span from midnight to one second before next midnight. The commit also fixes an error detection bug (filter.start_from/to and filter.end_from/to were updated too early). Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* CLI: long options to override configuration file settingsLars Henriksen2019-01-071-3/+29
| | | | | | | | | | The input and output date formats may be set from the command line. Intended for scripts that must be independent of the local user configuration. Cannot be used in interactive mode. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* CLI: take input date format from configuration file, do not accept timeLars Henriksen2019-01-072-73/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before this patch the input date parsing accepts three formats: yyyy/mm/dd, mm/dd/yyyy, yyyy-mm-dd. They are tried in sequence. It also accepts an additional time (hh:mm), or a time without a date. There are several issues with this: - it is not documented - the date format dd/mm/yyyy is not accepted - print_date() and filter option settings (in parse_args()) can only handle midnight times (which are the result of a date without time) - it is highly uncertain what happens if a time (without a date) is given; at least the -d option treats a time without colon (1215 for 12:15) as a number It seems that acceptance of time input is a by-product and not needed. For these reasons the input date parsing has been changed: - the format is taken from the configuration file (as is the case for the output date format) - only a date, and no time, is accepted Because the input date format is used during parsing of the command line, the configuration file must be loaded first, i.e. the options -D or -C must be parsed before the remaining ones. Loading the configuration file may result in errors (e.g. caused by changes between versions). For this reason config_load() has been made more tolerant and issues warnings instead of exiting. A followup patch will introduce two options to allow the configuration file settings to be overridden for input and output date formats. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Command line options: -P, option check, usage, helpLars Henriksen2019-01-071-25/+69
| | | | | | | | | | Option -F/--filter renamed to -P/--purge; -F retained as deprecated. Check for non-option arguments and for filter, format and query-range options only. Update of help and usage messages. Fixed --status output when calcurse is not running. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>