aboutsummaryrefslogtreecommitdiffstats
path: root/src/recur.c
Commit message (Collapse)AuthorAgeFilesLines
* Fix memory leak by freeing linked lists in recurrence rulesMax Kunzelmann2024-01-261-2/+12
| | | | | | | | | | | | The function responsible for freeing a recurring appointment or event did not free the linked lists contained in the `struct rpt` holding the recurrence rules. This led to memory leaks if a user had recurring appointments or events. Found with ASAN. Signed-off-by: Max Kunzelmann <max@mxzero.net> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Update copyright ranges for 2023Lukas Fleischer2023-04-111-1/+1
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix handling of recurrent open-ended appointments at 00:00Lukas Fleischer2023-01-011-7/+13
| | | | | | | | | Prior to this commit, a recurrent appointment ending at 00:00 on a given day was not considered to span the day. This is the correct behavior for all cases, except appointments without end time (both starting and ending at midnight on a given day). Handle this edge case explicitly. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Update copyright ranges for 2022Lukas Fleischer2022-03-111-1/+1
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Improve performance of recur_prev_occurrence()Lars Henriksen2020-12-191-12/+13
| | | | | | | And fix item start day for prev command Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Introduce macro DAYLars Henriksen2020-12-191-12/+10
| | | | | | | DAY(t) is midnight (the day) of time_t t. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add p(revious) commandLars Henriksen2020-10-111-0/+24
| | | | | | | | | | The p(rev) command finds the previous occurrence of a recurrent item, analogous to the n(ext) command. A bug in the next command is corrected.. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Extend import of recurrence rulesLars Henriksen2020-06-131-1/+1
| | | | | | | | Support has been implemented for recurrence rule parts BYMONTH, BYMONTHDAY and BYDAY. A new test has been added. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Update import of basic recurrence rulesLars Henriksen2020-06-131-0/+20
| | | | | | | | | | | | | | | | | | | Conversion of COUNT to UNTIL was a simple calculation which assumed one repetiton per period (day, week, month or year); it does not take exception days and invalid dates into account. Solved by a new function which returns the n'th occurrence of a recurrence rule. In calcurse UNTIL is interpreted as a day (DATE), in RFC 5545 as a time of day (DATE-TIME). This has implications when a recurrence rule has an occurrence on the UNTIL day, see comment in ical.c An "Import:" note is added when a multi-day event is imported and turned into a calcurse all-day event. Icalendar quotes in comments have been updated to RFC 5545. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Include start day in error message for recurrence ruleLars Henriksen2020-05-241-4/+8
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix "next occurrence" for multi-day appointmentsLars Henriksen2020-05-241-6/+9
| | | | | | | Better name: day for occur. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix recurrence rule expansion with ordered weekdayLars Henriksen2020-05-121-20/+43
| | | | | | | | | | | | | | When the order of a weekday in BYDAY rule expansion (like -5SA or 5SU for monthly or 55WE for yearly) exceeds the number of available weekdays in the period (month or year), rule expansion with negative order could result in a floating point exception. The reason: the modified frequency might become zero. Solution. Check order against number of available weekdays and terminate expansion early whenever possible (also for positive orders). Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Support interactive test of recurrence rule extensionsLars Henriksen2020-04-281-0/+24
| | | | | | | The generic command 'next' is introduced. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Refactor the repeat commandLars Henriksen2020-04-281-2/+1
| | | | | | | | | | Code duplication has been eliminated by calling update_rept() from the repeat command ui_day_item_repeat(). The repeat command asks for simple or advanced repetition. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* User interface for recurrence rulesLars Henriksen2020-04-281-16/+37
| | | | | | | | | | | | | | | | | | | | | | | | The function update_rept() is extended with editing of the three recurrence rule lists for BYMONTH, BYMONTHDAY and BYDAY. The integers of the bymonth and bymonthday lists are edited directly as integers, while those of the bywday list are mapped to localized weekday names (as they appear in the calendar panel) with an optional integer prefix (in RFC5545 style: 1MO, -2SA). The RFC5545 (icalendar) requirement that the start day must be the first occurrence and must match the recurrence rule, is met by testing that an occurrence indeed appears on the start day, in these circumstances: - when a recurrent item is loaded from file - when the recurrence rule of an item is edited interactively - when a recurrent appointment gets a new start time - when a recurrent appointment is moved Copy and paste of a recurrent item will only retain the basic recurrence properties of type, frequency, until and exception days. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Recurrence rule extensionsLars Henriksen2020-04-281-24/+737
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Terms and concepts are from RFC 5545 (the iCalendar specification). Overall design -------------- Calcurse is extended with full support for BYMONTH, BYDAY and BYMONTHDAY recurrence rule (rrule) parts. The three rule parts are lists of, respectively, months, weekdays and monthdays. The lists are added to 'struct rpt' as linked lists of integers, and the data file format is extended accordingly (details below). Load and save of the lists follow the pattern of the existing list of exception dates, also in 'struct rpt'. The function recur_item_find_occurence() is split into a front-end and a back-end. The back-end, called find_occurrence(), is the original function extended with rrule reductions; the front-end retains the original name and performs rrule expansions. Front-end plus back-end are backwards compatible and require no changes in calling functions. There is no user interface in this patch. Data file extensions -------------------- The BYMONTH, BYDAY and BYMONTHDAY lists are added to that part of an item line which describes the recurrence rule (the "{...}" part). Each list is - like the list of exception days - a space-separated string of values identified by the initial character. Each list is optional and, if present, must follow the until date and precede the exception day list. The lists must appear in order BYMONTHDAY list, BYDAY list and BYMONTH list. The possible list values are - BYMONTH: m1, m2, ..., m12 - BYDAY: w0, w1, ..., w6, w7, w-7, w8, w-8, ..., w377, w-377 - BYMONTHDAY: d1, d2, ..., d31, d-1, d-2, ..., d-31 which are interpreted as (cf. RFC 5545) - BYMONTH: January, February, ..., December. - BYDAY: SU, MO, ..., SA, +1SU, -1SU, +1MO, -1MO, ..., +53SA, -53SA - BYMONTHDAY: the first, the second, ..., the 31st, the last, the last but one, ..., the last but 30 day of the month Examples: Thursday, TH, is w4; Saturday, SA, is w6. The seventh Thursday, +7TH, is w53 (7 * 7 + 4 = 53); the last but second Saturday, -2SA, is w-20 (2 * 7 + 6 = 20); the last day of the month is d-1. Note that the values w-1, w-2, ..., w-6 are not used. A recurrent appointment with a BYDAY rule part: 06/23/2019 @ 12:00 -> 06/23/2019 @ 13:00 {1W w0 w6} |every week on Sunday and Saturday An event with a BYDAY and a BYMONTH rule part: 10/27/2019 [1] {1Y w-7 m10} every year on last Sunday in October An event with until date, a BYMONTH rule part and an exception day: 06/23/2019 [1] {1Y -> 08/31/2021 m5 m6 m7 !07/23/2020} every year on the 23rd in May, June and July for three years, starting on Sunday, 23 June 2019, but not on 23 July 2020. Recurrence set expansion and reduction --------------------------------------- In calcurse a recurrence rule is a quadruple (s, d, r, e) consisting of start, duration, repetition pattern and exception days and is implemented as: (time_t start, long dur, struct rpt *rpt, llist_t *exc) In RFC 5545 parlance, a recurrence rule defines a recurrence set consisting of all recurrence instances (occurrences) not earlier than start which match the rule pattern. With this concept in mind, recur_item_find_occurremce() may be thought of as a membership function for a recurrence set. The call recur_item_find_occurrence(s, d, r, e, day, occurrence) returns true if day belongs to the recurrence set of (s, d, r, e); if so occurrence points to the recurrence instance (the set member). For a recurrence rule with only the basic DAYLY, WEEKLY, MONTHLY or YEARLY type and frequency the recurrence set consists of periodically repeated instances. The BYxxx rule parts modify the recurrence set by reducing or expanding it as specified by RFC 5545. Expansion is implemented in the front-end by modifications of start and/or frequency of the rule (s, d, r, e), often several times, in such a way that the desired recurrence instances are included in the recurrence set. This is possible because the front-end as the very first thing checks for early days (day < s). When day is known not to be early, start (s) can safely be moved backwards. Likewise, if frequency must be changed, the front-end checks whether the frequency repetition applies to the week, month or year of day. Reduction is easier and is performed in the back-end along with the existing validity checks. It consists in checking whether month, day of month or weekday of a found occurrence is on the appropriate list. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Refactor edit of exception daysLars Henriksen2020-04-281-15/+15
| | | | | | | | | | | | | | | The patch contains no functional changes, but is a necessary precondition for extensions of update_rept() (in ui-day.c) with further recurrence rules. The reason is that recurrence parameters must be treated as a whole: if an edit session is cancelled at any point, no value should change, and all parameters should remain as they were. Hence, the new values must only be set after all of them have been determined. This was not the case for the list of exception days, but as long as it was treated last, it did not matter. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Improve data load error reportingLars Henriksen2020-04-281-19/+18
| | | | | | | | | | | The last part of loading appointments and events is performed by four "scan" functions called from io_load_app(). Failure in this part of data load does not use io_load_error(). The four "scan" functions are changed to return an error message on failure and NULL otherwise (the previous return value was not used). Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Refactor function calls: recurrence parameters as a single argumentLars Henriksen2020-04-281-81/+45
| | | | | | | | | | | | | | | | | | | | | The recurrence parameters are type, frequency, until date and exception list (in RFC 5545 parlance FREQ, INTERVAL, UNTIL and EXDATE's). When these are passed in a function call, the argument list becomes long and not very readable. When support for extended recurrence rules is implemented, the number of recurrence parameters increases, and function signatures must be amended. Solution: The "struct rpt" is extended with the exception list; any future recurrence parameters are added here. A pointer to this structure replaces the recurrence parameters in function calls. Note: Each recurrent event and appoinment instance has (a pointer to) a "struct rpt" and in addition an exception list. The latter is retained to avoid the derived changes, and the exception list in the structure is initialized to an empty list when the recurrent instance is created. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Use "struct rpt" to shorten argument listsLars Henriksen2020-04-281-80/+68
| | | | | | | Also, prepare for extension of the structure, shorten names and rearrange comments. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Update copyright rangesLukas Fleischer2020-01-301-1/+1
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* DST and recurrent itemsLars Henriksen2019-10-181-35/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adresses two issues with the function recur_item_find ocurrence(), one major: mktime(), and one minor: item duration. In addition, some refactoring is done. The following recurrent appointments demonstrate the problems (as described in the message) and are used as test cases in the associated test commit. 03/29/2019 @ 12:00 -> 03/30/2019 @ 11:00 {2D -> 04/03/2019} |two-day - every other day - not on 1/4 03/31/2019 @ 12:00 -> 03/31/2019 @ 13:00 {1D -> 04/01/2019} |daily - not on 31/3, twice on 1/4 03/31/2019 @ 04:00 -> 03/31/2019 @ 05:00 {1W} |weekly - appears after one week 03/31/2019 @ 12:00 -> 03/31/2019 @ 12:00 {1M} |monthly - never appears 03/31/2019 @ 12:00 -> 03/31/2019 @ 12:00 {1Y} |yearly - never appears 10/20/2019 @ 00:00 -> 10/21/2019 @ 01:00 {1W -> 11/03/2019} |25 hours - ends on 27th, but continues on 28th 03/24/2019 @ 00:00 -> 03/25/2019 @ 00:00 {1W -> 04/07/2019} |24 hours - does not continue on April 1 The root cause is two mktime() calls in recur_item_find_occurrence(), both of which use an inherited tm_isdst value in the tm structure. In such cases mktime() will "normalize" the tm stucture if tm_isdst is 0 or 1 and in disagreement with the rest of the tm contents (just like 32 May will be normalized to 1 June). Example. In 2019 DST started on 31/3 at 02:00:00 (in the European Union). If the (local) time "31/3/2018 00:00:00" is passed to mktime() with tm_isdst = 0, the return value is (say) T sec and the tm structure is unchanged, because DST is not in effect at midnight. If the same call is performed with tm_isdst = 1, the return value becomes (T - 3600) sec and the tm structure is normalized to "30/3/2018 23:00:00", tm_isdst = 0. In recur_item_find_occurrence(), the normalized tm structure with wrong day and time is used in ensuing calculations, leading to wrong dates and the errors observed. The first mktime() call is used to calculate the "day span" of the occurrence before the occurrence itself has been determined. But once the occurence is known, the "day span" is easily determined, and there is no need for the first mktime() call. Events have no explicit duration. However, recur_event_find_occurrence() and recur_event_inday() set the duration of an event to DAYINSEC before passing it on to recur_item_find_occurrence(). The value is not correct on the day when DST begins or ends. The interpretation of the daylength should be left to the called function. Hence, duration is set to -1 to signal no (explicit) duration. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Set time-of-day consistently to midnight for until dayLars Henriksen2019-09-061-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A day begins on midnight (inclusive) and ends on midnight (exclusive). A day as a whole is represented by the initial midnight, i.e. time-of-day is 00:00. On load of recurrent appointments (but not events) time-of-day for the until day is set to 23:59. For a newly created recurrent appointment the setting depends on the input method: time-of-day is set to 00:00 if until day is given as a date (day, month and year), but to time-of-day for the start day if given as an offset (+dd). The resulting behaviour is only visible in interactive use of calcurse as proved by the following scenario. 1) Create an appointment with start time 12:00, end time 11:59 (multi day). 2) Turn it into a recurrent appointment of type daily, frequency 3, until day +3. The appointment is correctly displayed with two 2-day occurrences three days apart. 3) Edit the appointment and select Repetition. Accept existing type, frequency and end day (now as a date). The second day of the second occurrence disappears. 4) Repeat 3), but set the end day as an offset (+3). The second day of the second occurrence reappears. The inconsistencies have been eliminated, and time-of-day for the until day is now always 00:00. Also, until day may equal start day, so midnights should be compared. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix monthly and yearly recurrence algorithmsLars Henriksen2019-09-061-5/+6
| | | | | | | | | | | | | | | | | | | | | | | The calculation of the year of the most recent occurrence for year dates before the start date (disregarding the year) is incorrect for frequencies greater than one. The most recent occurrence (for a date as mentioned) is either too far or too close in the past. In most cases it does no harm because the most recent ocurrence is in the past and does not span the date (i.e. there is no occurrence on the day). But the following appointment shows the presence of the bug: 12/31/2019 @ 12:00 -> 01/01/2020 @ 12:00 {2Y} |new year The occurence on 1 Jan 2020 is missing, because the most recent occurrence is too far in the past (31 Dec 2018 instead of 31 Dec 2019). An occurrence appears on 1 Jan 2021, because the most recent occurence is too close in the past (31 Dec 2020 instead of 31 Dec 2019). A similar miscalculation affects the monthly rule as proved by 3/31/2019 @ 12:00 -> 4/1/2019 @ 11:00 {2M} |change of month Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Treat recurrence item parameters as a unitLars Henriksen2019-06-161-1/+4
| | | | | | | | An edit session, and in particular, a cancelled edit session should encompass all parameters. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Impossible dates in recurrence rulesLars Henriksen2019-05-201-0/+12
| | | | | | | | | | | | | | | According to RFC 5545 dates like 30 February and 31 June must be ignored when derived from a recurrence rule. calcurse relies on mktime() "normalization" of dates (e.g. turning 32 December 2019 into 1 January 2020 when moving from 31 December to the next day). Normalization may also lead to impossible dates in monthly and yearly recurrence rules, and this must be avoided. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* View or edit exception days of a recurrent itemLars Henriksen2019-02-281-0/+51
| | | | | | | | | | | | The exception days are presented for viewing/editing as a string of space-separated dates (in the user-preferred input format). After editing the string is checked for valid dates, but there is no check that a date is meaningful (an occurrence day of the item between start day and until day). Although possible, it is best to add exception days in the usual way by deletion of occurrences. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Use time_t for system time valuesLukas Fleischer2019-01-141-20/+20
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix next recurring appointmentLars Henriksen2019-01-111-23/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Recurring appointments do not show up in the notification bar as next appointment. This was partly corrected by 2084f35 (Fix notification of recurrent appointments, 2017-02-09) and 5aa7a09 (Fix another error in the notification code, 2017-02-11). The search function recur_apoint_starts_before() had a wrong second argument, but is really of no use: the start time of a recurring appointment is the start time of the very first occurrence (in the past). A comparison against the item in the notify_app structure tells nothing of the start time of the current day; at most it eliminates some future recurring appointments. The function can be dropped, and the entire recurring appointment list looked through. The proper start time is found in the main search loop (and called real_recur_start_time) and must be compared against the item in the notify_app structure. But because recur_apoint_find_occurrence() is limited to a particular day (second argument), two searches are necessary to cover 24 hours. Unrelated cleanups: removed function return value; changed long to time_t. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Filter option: invertLars Henriksen2019-01-071-48/+53
| | | | | | | | | | | | | New filter option: --filter-invert. When present it inverts (negates) the other filter options combined. This is mostly useful with the -G option (with -Q the output is limited by the query range (day range)). The ouput from "calcurse -G <filter options>" is the (set) complement of "calcurse -G <filter options> --filter-invert". Here <filter options> may be any combination of filter options. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* CLI: filter options have no effect for dates before the epochLars Henriksen2019-01-071-8/+8
| | | | | | | | | | | | | | | | With the exception of filter.type_mask, a filter is only applied if set explicitly on the command line with a filter option. Whether that is the case, is determined by comparison with the initialization value. For date related filters (start_from/to, end_from/to) that is -1, hence the criterion is != -1, not >= 0. In generel, a filter initialization value should be invalid (i.e. one that cannot be set explicitly). As times before the epoch (1 January 1970 00:00:00 UTC) are negative, -1 is a valid Unix time. However, as it cannot be set from the command line, it is probably no problem? Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* DST fix: adjusting time in appointmentsLars Henriksen2018-11-101-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | Calcurse saves time and date information on disk as local time in readable text file format. When loaded from disk or when entered by the user, local time is converted to Unix time (seconds since 00:00:00, 1 January 1970). When displayed, and later when saved to disk, the Unix time is converted back to readable local time. Both conversions depend on DST. Hence, if midnight for a day with DST in effect (i.e. local time) is converted, increased with an amount and converted back, the amount has changed if DST is _not_ in effect for the resulting time. In general, calculations on Unix time variables should be used with caution because of the DST-dependent conversions. Instead, the calculations should be performed on local time data with the help of mktime(). The commit fixes start time for pasted appointments (ordinary and recurrent) and the 'until'-date of recurrent appointments, pasted as well as new and edited. The latter problem is slightly different in that the adjustment is a number of days, as it is for exception dates. Update of the date in parse_datetime() has been corrected to be similar to update of the time, although no problem has been identified. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix another error in the notification codeLukas Fleischer2017-02-111-1/+6
| | | | | | | | | | In addition to checking whether a recurrent item predates the current next appointment, we need to check that the actual occurrence of the item predates the current appointment as well. Fixes GitHub issue #26. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix notification of recurrent appointmentsLukas Fleischer2017-02-091-2/+8
| | | | | | | | | | | | | | | The recur_apoint_starts_before() filter function expected the second parameter to be passed by value, whereas its only caller passed the value by reference. For consistency with apoint_starts_after(), change the signature and the implementation of recur_apoint_starts_before() such that the parameter is passed by reference. Also, add a comment to the only caller of recur_apoint_starts_before() to clarify on why recur_apoint_starts_before() is used. Fixes GitHub issue #25. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Update copyright rangesLukas Fleischer2017-01-121-1/+1
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Do not assume that days always have 86400 secondsLukas Fleischer2016-03-271-2/+2
| | | | | | | | Make that date membership is computed correctly, even if a day has less than 86400 seconds (e.g. after changing clocks). Reported-by: Hakan Jerning <jerning@home.se> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Improve ordering of appointments/eventsLukas Fleischer2016-02-151-9/+22
| | | | | | | | * Order by start time first. * Order items with the same start time by priority. * Order items with the same start and priority by description. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Update copyright rangesLukas Fleischer2016-01-301-1/+1
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add an option to filter by object hashLukas Fleischer2016-01-131-3/+29
| | | | | | | | | Implement a new --filter-hash option to filter by object identifiers. Each object having an identifier that has the specified pattern as a prefix is matched. Patterns starting with an exclamation mark (!) are interpreted as negative patterns. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add long format specifiers "raw" and "hash"Lukas Fleischer2016-01-131-0/+21
| | | | | | | Add new format specifiers to print the raw item representation or an object's hash value. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Implement recur_{apoint,event}_tostr()Lukas Fleischer2016-01-131-27/+51
| | | | | | | Add functions to serialize recurrent items without immediately writing them to stdout. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add support for --filter-end-* to eventsLukas Fleischer2015-05-201-1/+6
| | | | | | | A natural convention is to specify the end time of an event as 23:59:59 on the day it is scheduled. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Use time_t instead of long in several placesLukas Fleischer2015-02-241-4/+4
| | | | | | | Start converting some variables and return values to store times from long to time_t. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Update copyright rangesLukas Fleischer2015-02-071-1/+1
| | | | Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Add pattern filter optionLukas Fleischer2014-08-061-0/+4
| | | | | | | This adds a new item filter option --filter-pattern and removes the whole -S parameter logic, while making -S an alias for --filter-pattern. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Add item filtersLukas Fleischer2014-08-061-2/+28
| | | | | | | | | | | | | | | | | This adds the following filter options that allow for restricting the set of items that are read from the appointments file: * --filter-type * --filter-start-from * --filter-start-to * --filter-start-after * --filter-start-before * --filter-end-from * --filter-end-to * --filter-end-after * --filter-end-before Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Initialize linked list for recurrent itemsLukas Fleischer2014-07-161-0/+5
| | | | | | | | | | When switching to the generic linked list implementation for recurring events in 9fab248 (Use generic lists for recurring apointments and events., 2011-04-16), no initialization routine for the list of recurring events was added. Fix this and properly initialize the list on startup. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* recur.c: Refactor/Reformat recur_item_find_occurrence()Lukas Fleischer2013-05-021-17/+13
| | | | | | | Fix a couple of whitespace and line breaks. Bail out early instead of using nested if statements. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* recur_exc_scan(): Do not check time of exceptionsLukas Fleischer2013-04-141-2/+1
| | | | | | | | | | Exceptions do not contain a time field -- do not check time fields which may be uninitialized. Regression introduced in 9907069f442c56c90b67accb2d8fbd046dfce6db. This fixes test/recur-*.sh. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Use tabs instead of spaces for indentationLukas Fleischer2013-04-141-543/+562
| | | | | | | | | | | This completes our switch to the Linux kernel coding style. Note that we still use deeply nested constructs at some places which need to be fixed up later. Converted using the `Lindent` script from the Linux kernel code base, along with some manual fixes. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
generated by cgit v1.2.3-54-g00ecf (git 2.44.0) at 2024-04-25 17:39:38 +0000