summaryrefslogtreecommitdiffstats
path: root/src/apoint.c
Commit message (Collapse)AuthorAgeFilesLines
* Use time_t for system time valuesLukas Fleischer2019-01-141-6/+6
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Filter option: invertLars Henriksen2019-01-071-23/+23
| | | | | | | | | | | | | New filter option: --filter-invert. When present it inverts (negates) the other filter options combined. This is mostly useful with the -G option (with -Q the output is limited by the query range (day range)). The ouput from "calcurse -G <filter options>" is the (set) complement of "calcurse -G <filter options> --filter-invert". Here <filter options> may be any combination of filter options. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* CLI: filter options have no effect for dates before the epochLars Henriksen2019-01-071-4/+4
| | | | | | | | | | | | | | | | With the exception of filter.type_mask, a filter is only applied if set explicitly on the command line with a filter option. Whether that is the case, is determined by comparison with the initialization value. For date related filters (start_from/to, end_from/to) that is -1, hence the criterion is != -1, not >= 0. In generel, a filter initialization value should be invalid (i.e. one that cannot be set explicitly). As times before the epoch (1 January 1970 00:00:00 UTC) are negative, -1 is a valid Unix time. However, as it cannot be set from the command line, it is probably no problem? Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* DST fix: daylength v. DAYINSECLars Henriksen2018-11-101-1/+1
| | | | | | | | | | | | | | | The number of seconds in a day and daylength in seconds differ when Daylight Saving Time is in effect on two days of the year. The day when DST takes effect is 23 hours long, and the day when DST ends is 25 hours long. In the latter case the date changing thread wóuld enter a loop in the last hour before midnight (in the former it would set the date an hour too late). The next midnight is calculated through mktime(), invoked by date2sec(). Wrong daylength prevented appointments from being stored in the day vector and caused them to be displayed wrongly in the appts panel. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* DST fix: adjusting time in appointmentsLars Henriksen2018-11-101-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | Calcurse saves time and date information on disk as local time in readable text file format. When loaded from disk or when entered by the user, local time is converted to Unix time (seconds since 00:00:00, 1 January 1970). When displayed, and later when saved to disk, the Unix time is converted back to readable local time. Both conversions depend on DST. Hence, if midnight for a day with DST in effect (i.e. local time) is converted, increased with an amount and converted back, the amount has changed if DST is _not_ in effect for the resulting time. In general, calculations on Unix time variables should be used with caution because of the DST-dependent conversions. Instead, the calculations should be performed on local time data with the help of mktime(). The commit fixes start time for pasted appointments (ordinary and recurrent) and the 'until'-date of recurrent appointments, pasted as well as new and edited. The latter problem is slightly different in that the adjustment is a number of days, as it is for exception dates. Update of the date in parse_datetime() has been corrected to be similar to update of the time, although no problem has been identified. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix support for punctual appointments at 00:00Lukas Fleischer2017-08-281-2/+3
| | | | | | | | | | | | | | When checking whether an appointment belongs to a given day in apoint_inday(), the return value was 0 if the end time of the appointment matched 00:00 on that day (because we do not want to include appointments starting on the day before and lasting until midnight). However, this means that punctual appointments at 00:00 were not included in any day. Fix the apoint_inday() logic to take this into consideration. Fixes GitHub issue #39. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Update copyright rangesLukas Fleischer2017-01-121-1/+1
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix apoint_inday() with long appointmentsLukas Fleischer2016-03-281-1/+2
| | | | | | | Fixes a regression introduced in 9e160fa (Do not assume that days always have 86400 seconds, 2016-03-27). Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Do not assume that days always have 86400 secondsLukas Fleischer2016-03-271-2/+1
| | | | | | | | Make that date membership is computed correctly, even if a day has less than 86400 seconds (e.g. after changing clocks). Reported-by: Hakan Jerning <jerning@home.se> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Improve ordering of appointments/eventsLukas Fleischer2016-02-151-4/+13
| | | | | | | | * Order by start time first. * Order items with the same start time by priority. * Order items with the same start and priority by description. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Update copyright rangesLukas Fleischer2016-01-301-1/+1
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add an option to filter by object hashLukas Fleischer2016-01-131-1/+14
| | | | | | | | | Implement a new --filter-hash option to filter by object identifiers. Each object having an identifier that has the specified pattern as a prefix is matched. Patterns starting with an exclamation mark (!) are interpreted as negative patterns. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add long format specifiers "raw" and "hash"Lukas Fleischer2016-01-131-0/+11
| | | | | | | Add new format specifiers to print the raw item representation or an object's hash value. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Implement {apoint,event,todo}_tostr()Lukas Fleischer2016-01-131-9/+21
| | | | | | | Add functions to serialize non-recurrent objects without immediately writing them to stdout. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Update copyright rangesLukas Fleischer2015-02-071-1/+1
| | | | Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Add pattern filter optionLukas Fleischer2014-08-061-0/+2
| | | | | | | This adds a new item filter option --filter-pattern and removes the whole -S parameter logic, while making -S an alias for --filter-pattern. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Add item filtersLukas Fleischer2014-08-061-1/+16
| | | | | | | | | | | | | | | | | This adds the following filter options that allow for restricting the set of items that are read from the appointments file: * --filter-type * --filter-start-from * --filter-start-to * --filter-start-after * --filter-start-before * --filter-end-from * --filter-end-to * --filter-end-after * --filter-end-before Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Use tabs instead of spaces for indentationLukas Fleischer2013-04-141-135/+138
| | | | | | | | | | | This completes our switch to the Linux kernel coding style. Note that we still use deeply nested constructs at some places which need to be fixed up later. Converted using the `Lindent` script from the Linux kernel code base, along with some manual fixes. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Validate date/time when scanning itemsLukas Fleischer2013-02-271-0/+6
| | | | | | | | | | | | | | | | Bail out when reading dates such as "02/30/2013" from the appointments file. These *could* be converted into valid dates but since we never write invalid dates to that file, these indicate a user error. Fixes following test cases: * appointment-009.sh * appointment-012.sh * appointment-016.sh * appointment-019.sh * event-003.sh Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Fix braces in if-else statementsLukas Fleischer2013-02-171-4/+4
| | | | | | | | | | From the Linux kernel coding guidelines: Do not unnecessarily use braces where a single statement will do. [...] This does not apply if one branch of a conditional statement is a single statement. Use braces in both branches. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* apoint.c: Split out UI-related functionsLukas Fleischer2013-02-141-122/+0
| | | | | | | * Move UI-related functions to "ui-day.c". * Rename UI-related functions to ui_day_*(). Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Update copyright rangesLukas Fleischer2013-02-041-1/+1
| | | | | | | Add 2013 to the copyright range for all source and documentation files. Reported-by: Frederic Culot <frederic@culot.org> Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Add compact panels supportLukas Fleischer2012-11-251-1/+1
| | | | | | | | | | | | | Add a configuration option that allows for switching to compact panel mode. In this mode, all window labels are hidden, so that there's more space for actual information. This patch doesn't add a configuration menu entry and doesn't add any documentation. Implements FR#7. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Merge branch 'maint'Lukas Fleischer2012-11-231-16/+13
|\ | | | | | | | | | | Conflicts: src/day.c src/recur.c
| * Replace localtime() with localtime_r()Lukas Fleischer2012-11-221-16/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the result of localtime() is stored in a statically allocated structure, data was overwritten when a context switch occurred during (or shortly after) the execution of localtime(), potentially resulting in critical data corruption. BUG#7 and BUG#8 are likely related. This patch converts all usages of localtime() with localtime_r(), which is thread-safe. Reported-by: Baptiste Jonglez <baptiste@jonglez.org> Reported-by: Erik Saule <esaule@bmi.osu.edu> Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Use integers rather than floats everywhereLukas Fleischer2012-07-101-3/+2
| | | | | | | | | | | | | | | | | | | | | | We don't need floating point precision if results are casted back to integer. Instead, rearrange operations and do the integer division after the multiplication. Version numbers are terminating decimals anyway and can be stored using two integers without losing any information. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Remove the erase flag and legacy deletion codeLukas Fleischer2012-07-071-21/+8
| | | | | | | | | | | | | | | | This is no longer needed. Note removal, as well as exception handling, have been moved to separate functions and the cut feature has been merged into the deletion function. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Refactor note removalLukas Fleischer2012-07-071-3/+0
| | | | | | | | | | | | | | | | Remove the note removal code from *_delete()/*_erase() and create a new wrapper function called day_item_erase_note() that is be used to drop the note being associated to an item. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Refactor *_dup()Lukas Fleischer2012-07-061-7/+12
| | | | | | | | | | | | | | | | * Actually duplicate an item instead of copying data only. * Properly clone an item without a note. * Mark *_dup() public. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Remove legacy cut/paste codeLukas Fleischer2012-06-301-10/+0
| | | | | | | | | | | | | | Note that this doesn't remove *_dup() since these might still be needed later. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Revise cut/pastingLukas Fleischer2012-06-301-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of calling type-specific duplication handlers and inserting clones of the original items when pasting, save the generic day item and remove the actual item from the linked list, so that it can be inserted anywhere else later. The cut/paste buffer is moved to the interaction unit, item-specific cut operations are changed to remove the item from the linked list only instead of copying and freeing it. An item is only freed if another item is cut before the current cut/paste buffer is pasted. All paste operations are changed and reinsert the actual item instead of creating a clone. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Make *_free() publicLukas Fleischer2012-06-301-1/+1
| | | | | | | | Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Move apoint_{cut,paste}() to interaction unitLukas Fleischer2012-06-301-51/+0
| | | | | | | | | | | | | | | | These functions get the current selection, call day_*_item() and fix the current selection on the appointment panel, so move them where they belong. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Revise *_delete{,_bynum}()Lukas Fleischer2012-06-301-4/+2
| | | | | | | | | | | | | | | | Always pass an item instead of passing a date and a index. This makes use of the NULL callback that was added with one of the previous patches. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Allow passing more complex data to list callbacksLukas Fleischer2012-06-301-6/+6
| | | | | | | | | | | | | | | | Change the data type of the "data" parameter from "long" to "void *" in llist_find_*() signatures to allow for passing more complex objects. Change all llist_find_*() invocations and callbacks accordingly. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Move interaction functions to a separate fileLukas Fleischer2012-06-301-144/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a first step to clean up several compilation units and separate the front end from back-end operations. All functions that require user interaction are moved to a new compilation unit "interaction.c". Also, following things are adjusted to the new layout: * Make day_item_get_*() and a few other functions public, so that it can be accessed from the new compilation unit. * Use apoint_hilt(), todo_hilt(), etc. instead of directly accessing static variables. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Remove unused functionsLukas Fleischer2012-06-301-12/+0
| | | | | | | | | | | | | | Remove apoint_get(), event_get(), recur_get_apoint() and recur_get_event(), since they are no longer used. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Simplify apoint_switch_notify()Lukas Fleischer2012-06-301-22/+1
| | | | | | | | | | | | | | | | | | Pull out code from apoint_switch_notify() -- especially the fallback routine that calls recur_apoint_switch_notify() if the currently selected item is a recurrent item -- and move it to a wrapper function day_item_switch_notify(). Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Simplify recur_apoint_switch_notify()Lukas Fleischer2012-06-301-1/+1
|/ | | | | | | | | Pass the recurrent appointment itself instead of passing a date and an item number. This is quite simple as we can just pass the pointer that is contained in the generic item structure and don't have to LLIST_TS_FIND_*() the item first any more. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Switch to Linux kernel coding styleLukas Fleischer2012-05-211-342/+280
| | | | | | | | | | | | | | Convert our code base to adhere to Linux kernel coding style using Lindent, with the following exceptions: * Use spaces, instead of tabs, for indentation. * Use 2-character indentations (instead of 8 characters). Rationale: We currently have too much levels of indentation. Using 8-character tabs would make huge code parts unreadable. These need to be cleaned up before we can switch to 8 characters. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Factorize boolean user prompting.Baptiste Jonglez2012-05-141-2/+1
| | | | | | | | | | | Introduce a new `status_ask_bool()` function, and use it where applicable. This greatly reduces code duplication, and will allow handling special events (resize, user escape) much more uniformely. Signed-off-by: Baptiste Jonglez <baptiste--git@jonglez.org> Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Miscellaneous small code cleanupsLukas Fleischer2012-04-061-7/+2
| | | | Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Mark localized string literals constantLukas Fleischer2012-04-051-7/+7
| | | | | | | Translated strings returned by gettext() are statically allocated and shouldn't be modified. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Update copyright rangesLukas Fleischer2012-03-261-1/+1
| | | | | | Add 2012 to the copyright range for all source and documentation files. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Trap fgets() failure in *_scan()Lukas Fleischer2012-02-181-1/+3
| | | | | | | | Ensure we don't read arbitrary data when fgets() returns a NULL string (meaning that either the EOF is encountered or an error occurred). This also fixes a couple of compiler warnings seen with "-Wunused-result". Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* src/apoint.c: Update in-notify-bar help for new duration syntaxBaptiste Jonglez2012-01-071-2/+2
| | | | | Signed-off-by: Baptiste Jonglez <baptiste@jonglez.org> Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* src/apoint.c: Fix a length bug introduced by new duration formatBaptiste Jonglez2012-01-071-1/+1
| | | | | | | | | | | | | | | | Commit 4ff3bb9d introduced a new format for parsing durations, thus allowing a larger string to be retrieved from user input. However, the string used is still declared with the old length, leading to crashes when compiling with stack-smashing protection features (the default on Archlinux). Inputting a duration string of more than 8 characters (such as "+1d11h11m") would crash calcurse with a *** stack smashing detected *** message. Using a larger string from the start fixes the bug. Signed-off-by: Baptiste Jonglez <baptiste@jonglez.org> Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* src/apoint.c: Remove several unneeded variablesLukas Fleischer2011-12-051-36/+30
| | | | Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* src/apoint.c: Remove apoint_recur_s2apoint_s()Lukas Fleischer2011-11-141-16/+0
| | | | | | | This one is hackish, obsolete and no longer used by any other function. Drop it! Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* Removed unused parameter from apoint_sec2str()Lukas Fleischer2011-11-141-1/+1
| | | | | | This is no longer needed as of commit 2d89d336. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>