aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
| * Release screen mutex if thread diesLukas Fleischer2012-11-234-32/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We did not setup a thread cleanup procedure which resulted in calcurse freezing if a thread tried to draw on the screen after another thread was canceled while locking the screen. Note that this kind of cleanup handlers should be added to other mutexes as well. This patch just removes the most common case of triggering a deadlock. Also note that we cannot move pthread_cleanup_push() and pthread_cleanup_pop() into the locking/unlocking functions since both pthread_cleanup_push() and pthread_cleanup_pop() may be implemented as macros that must be used in pairs within the same lexical scope. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
| * Lock screen when drawing on the calendar/notification panelLukas Fleischer2012-11-234-3/+61
| | | | | | | | | | | | | | | | | | | | | | | | Lock the screen if either the calendar panel or the notification bar is updated to avoid race conditions. Addresses BUG#6. Note that we currently always use a screen-level lock, even if only one window is affected. This is to be changed in the future. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
| * Do not display a mark when files are auto-savedLukas Fleischer2012-11-232-23/+2
| | | | | | | | | | | | | | | | | | | | This is kind of useless since users are not able to react to an auto-save notification. It also causes all kinds of problems if the status bar is in a non-standard mode (message, prompt, ...) and is prone to race conditions if the status bar is updated by another thread at the same time. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
| * Replace localtime() with localtime_r()Lukas Fleischer2012-11-2210-126/+133
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the result of localtime() is stored in a statically allocated structure, data was overwritten when a context switch occurred during (or shortly after) the execution of localtime(), potentially resulting in critical data corruption. BUG#7 and BUG#8 are likely related. This patch converts all usages of localtime() with localtime_r(), which is thread-safe. Reported-by: Baptiste Jonglez <baptiste@jonglez.org> Reported-by: Erik Saule <esaule@bmi.osu.edu> Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Use status_ask_choice() for the export dialogLukas Fleischer2012-11-183-39/+14
| | | | | | | | | | | | | | | | Remove the export bar and use a simple status_ask_choice() dialog instead. This reduces code complexity and replaces another unnecessary menu by the well-tested dialog feature that is used everywhere else. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Remove unused parameter from key handlersLukas Fleischer2012-11-181-46/+46
| | | | | | | | | | | | | | This is no longer needed since different keys use different handlers now. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | calcurse.c: Pull out key_move_*()Lukas Fleischer2012-11-181-22/+40
| | | | | | | | | | | | | | | | | | | | | | Supersedes the "key" parameter from following functions: * key_generic_prev_day() * key_generic_next_day() * key_generic_prev_week() * key_generic_next_week() Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | calcurse.c: Break up key_change_priority()Lukas Fleischer2012-11-181-5/+14
| | | | | | | | | | | | | | | | Split up key_change_priority() into key_raise_priority(), key_lower_priority() which are wrappers around a new convenience function change_priority(). Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | calcurse.c: Pull out key_generic_goto_today()Lukas Fleischer2012-11-181-5/+11
| | | | | | | | | | | | | | | | Split out key_generic_goto_today() into a separate function. This simplifies the control flow and supersedes the "key" parameter in key_generic_goto(). Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Refactor todo_chg_priority()Lukas Fleischer2012-11-182-19/+9
| | | | | | | | | | | | | | Instead of passing a key, pass the number of steps to increase the priority by. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | calcurse.c: Refactor the main loopLukas Fleischer2012-11-181-353/+425
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Break up the big switch statement into several functions. The functions are declared inline to avoid unnecessary function calls. Also: * Add a "KEY_HANDLER" macro can be used as a short version of a "case" statement, followed by a function call. * Declare several state variables global to avoid having to pass them to each of the new handlers. * Pass the pressed key to each of the handler functions in order not to break handlers that handled more than one key before the handlers were pulled out. These three changes were introduced to keep this patch as atomic as possible and are intended to be removed in following patches. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Add support for entering times in 24 hour formatWilliam Pettersson2012-11-182-10/+12
| | | | | | | | Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Simplify autogen.shLukas Fleischer2012-11-181-150/+5
| | | | | | | | | | | | | | | | | | | | | | | | Replace the whole autogen.sh magic by four simple lines that execute the commands that are actually needed. This enables verbose error output and allows advanced users to figure out what went wrong in case of errors. We expect users building calcurse from Git to be smart enough to fix "command not found" errors by themselves. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Use integers rather than floats everywhereLukas Fleischer2012-07-104-25/+21
| | | | | | | | | | | | | | | | | | | | | | We don't need floating point precision if results are casted back to integer. Instead, rearrange operations and do the integer division after the multiplication. Version numbers are terminating decimals anyway and can be stored using two integers without losing any information. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Add new default key binding for generic-pasteLukas Fleischer2012-07-071-1/+1
| | | | | | | | | | | | Use "p" as an additional (vim-style) default binding for generic-paste. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Remove the erase flag and legacy deletion codeLukas Fleischer2012-07-075-82/+27
| | | | | | | | | | | | | | | | This is no longer needed. Note removal, as well as exception handling, have been moved to separate functions and the cut feature has been merged into the deletion function. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Merge cut/deleteLukas Fleischer2012-07-076-158/+83
| | | | | | | | | | | | | | Remove the cut function and merge it into the del-item command. This allows for vim-style cutting/pasting. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Refactor exception handlingLukas Fleischer2012-07-074-54/+72
| | | | | | | | | | | | | | | | | | Remove the exception handling code from recur_*_erase() and move it to separate functions recur_*_add_exc(). Create a wrapper function day_item_add_exc() that can be used to add an exception to generic items. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Refactor note removalLukas Fleischer2012-07-076-32/+31
| | | | | | | | | | | | | | | | Remove the note removal code from *_delete()/*_erase() and create a new wrapper function called day_item_erase_note() that is be used to drop the note being associated to an item. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Add support for copy/paste registersLukas Fleischer2012-07-077-38/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for vim-style copy/paste registers which allows cutting and copying multiple items without having to overwrite the copy/paste buffer. Registers can be specified using the quote key ('"'). To access a register, type '"x' before a command where "x" is the name of a register. If you want to copy the currently selected item into register 1, type '"1c'. Valid registers are 0-9, a-z, "-" and "_". Note that the latter is the so-called black hole register, which works similar to the black hole register in vim. The register prefix key is currently hardcoded and cannot be configured. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Add a key binding for generic-copyLukas Fleischer2012-07-065-13/+29
| | | | | | | | | | | | This finally adds full copy-paste support. Implements FR#15. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Add interact_day_item_copy()Lukas Fleischer2012-07-062-0/+13
| | | | | | | | | | | | | | This can be used to copy an item, so that it can be pasted somewhere else later. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Do not bind "c" to "generic-config-menu" by defaultLukas Fleischer2012-07-061-1/+1
| | | | | | | | | | | | | | | | The "c" key will be used for the generic-copy command in the future. The configuration menu isn't needed a lot, so binding it to "C" only seems legit. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Duplicate items when pastingLukas Fleischer2012-07-061-2/+3
| | | | | | | | | | | | This allows pasting items more than once. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Add day_item_fork()Lukas Fleischer2012-07-062-0/+26
| | | | | | | | | | | | | | Add a new function that can be used to copy one day item into another, cloning the actual item that is linked. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Refactor *_dup()Lukas Fleischer2012-07-064-36/+62
| | | | | | | | | | | | | | | | * Actually duplicate an item instead of copying data only. * Properly clone an item without a note. * Mark *_dup() public. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Revise todo_delete_note_bynum()Lukas Fleischer2012-07-043-9/+3
| | | | | | | | | | | | | | Pass an item instead of passing a list item index (analogous to commit 02c90ba53a658686bad5cb5f88c555d9eef06399). Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Remove unused function day_item_nb()Lukas Fleischer2012-07-042-20/+0
| | | | | | | | Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Summarize all contributions to translationsStéphane Aulery2012-07-042-12/+23
| | | | | | | | | | Signed-off-by: Stéphane Aulery <lkppo@free.fr> Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Add a test case to reproduce BUG#2Lukas Fleischer2012-06-303-1/+20
| | | | | | | | Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Allow passing both "-D" and "-c"Lukas Fleischer2012-06-304-55/+50
| | | | | | | | | | | | | | | | | | | | This is particularly useful if one wants to use configuration and key bindings from a specific directory, while using an appointment file from somewhere else. "-c" has precedence over "-D". Also update the usage message, man page and documentation. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Implement a cache for the monthly viewLukas Fleischer2012-06-304-1/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a very simple cache, which is used to store the days that contain an event or an appointment. This makes redrawing and browsing the calendar panel much faster. The cache has a size of 31 integers (which is equivalent to 124 bytes on a 32 bit system and 248 bytes on a 64 bit system) and invalidates itself if the current month has changed. If an item is added/changed/removed, the cache needs to be invalidated manually by calling calendar_monthly_view_cache_set_invalid(). Note that this will always invalidate the whole cache, even if only one item at the last day of the month was removed. This is a trade-off between simplicity and efficiency. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Remove unneeded parameter/return valueLukas Fleischer2012-06-303-12/+7
| | | | | | | | | | | | | | | | The item type parameter/return value no longer needs to be passed/returned to interact_day_item_{paste,cut}(), since the type descriptor is saved when cutting an item now. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Remove legacy cut/paste codeLukas Fleischer2012-06-303-50/+0
| | | | | | | | | | | | | | Note that this doesn't remove *_dup() since these might still be needed later. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Revise cut/pastingLukas Fleischer2012-06-307-98/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of calling type-specific duplication handlers and inserting clones of the original items when pasting, save the generic day item and remove the actual item from the linked list, so that it can be inserted anywhere else later. The cut/paste buffer is moved to the interaction unit, item-specific cut operations are changed to remove the item from the linked list only instead of copying and freeing it. An item is only freed if another item is cut before the current cut/paste buffer is pasted. All paste operations are changed and reinsert the actual item instead of creating a clone. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Make *_free() publicLukas Fleischer2012-06-305-5/+10
| | | | | | | | Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Move apoint_{cut,paste}() to interaction unitLukas Fleischer2012-06-304-55/+55
| | | | | | | | | | | | | | | | These functions get the current selection, call day_*_item() and fix the current selection on the appointment panel, so move them where they belong. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Remove "appt_pos" member from day itemsLukas Fleischer2012-06-302-8/+5
| | | | | | | | | | | | This is no longer used and removing it saves a few bytes per item. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Add an item parameter to various todo_*() functionsLukas Fleischer2012-06-303-19/+12
| | | | | | | | | | | | | | | | These functions operate on arbitrary items. Pull out the code that gets the currently selected item, get the current selection when one of the functions is called and pass it as a parameter. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Add an item parameter to various day_*() functionsLukas Fleischer2012-06-303-19/+12
| | | | | | | | | | | | | | | | These functions operate on arbitrary items. Pull out the code that gets the currently selected item, get the current selection when one of the functions is called and pass it as a parameter. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Revise *_delete{,_bynum}()Lukas Fleischer2012-06-307-38/+26
| | | | | | | | | | | | | | | | Always pass an item instead of passing a date and a index. This makes use of the NULL callback that was added with one of the previous patches. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | src/llist.c: Compare data pointers if callback is NULLLukas Fleischer2012-06-301-9/+30
| | | | | | | | | | | | | | | | If a NULL callback is passed to llist_find_*(), fall back to comparing data pointers. The check for a NULL callback pointer is done outside the main loop with an eye towards performance. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Allow passing more complex data to list callbacksLukas Fleischer2012-06-307-42/+42
| | | | | | | | | | | | | | | | Change the data type of the "data" parameter from "long" to "void *" in llist_find_*() signatures to allow for passing more complex objects. Change all llist_find_*() invocations and callbacks accordingly. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Rename interaction functionsLukas Fleischer2012-06-303-31/+30
| | | | | | | | | | | | | | | | Rename all interaction functions for the sake of consistency and add a "interact_" prefix. Also, mark day_erase_item() static since it is not used anywhere else. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Move interaction functions to a separate fileLukas Fleischer2012-06-308-840/+889
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a first step to clean up several compilation units and separate the front end from back-end operations. All functions that require user interaction are moved to a new compilation unit "interaction.c". Also, following things are adjusted to the new layout: * Make day_item_get_*() and a few other functions public, so that it can be accessed from the new compilation unit. * Use apoint_hilt(), todo_hilt(), etc. instead of directly accessing static variables. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Remove unused functionsLukas Fleischer2012-06-304-54/+0
| | | | | | | | | | | | | | Remove apoint_get(), event_get(), recur_get_apoint() and recur_get_event(), since they are no longer used. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | Simplify apoint_switch_notify()Lukas Fleischer2012-06-304-24/+19
| | | | | | | | | | | | | | | | | | Pull out code from apoint_switch_notify() -- especially the fallback routine that calls recur_apoint_switch_notify() if the currently selected item is a recurrent item -- and move it to a wrapper function day_item_switch_notify(). Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | day_store_items(): Return the number of items foundLukas Fleischer2012-06-302-14/+9
| | | | | | | | | | | | | | | | | | Return the total number of items found instead of the pad length, since this is used to store items in non-interactive mode as well now. The pad length can still be calculated by using the appointment and event count parameters. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | src/args.c: Revise app_arg()Lukas Fleischer2012-06-301-110/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This kills the hackish code we used to filter and display appointments and events in non-interactive mode. From now on, the same algorithm that is used in interactive mode (read day_store_items() for details) is called, resulting in code that is much easier to maintain. The resulting performance loss is rather small. Here are the run times of `calcurse -s01/01/1902 -r18250 -D ../test/data >/dev/null` before and after the patch was applied: 0.30user 0.26system 0:01.22elapsed 46%CPU (0avgtext+0avgdata 1340maxresident)k 0inputs+0outputs (0major+398minor)pagefaults 0swaps 0.33user 0.21system 0:01.18elapsed 46%CPU (0avgtext+0avgdata 1360maxresident)k 0inputs+0outputs (0major+395minor)pagefaults 0swaps Note that this also fixes a few bugs that were encountered in non-interactive mode, most notably BUG#2. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
* | src/day.c: Add day_write_stdout()Lukas Fleischer2012-06-302-0/+31
| | | | | | | | | | | | | | | | | | This function allows for writing stored items to stdout in a fashion similar to day_write_pad(). This will be used as a convenience wrapper when switching to day_store_items() in non-interactive mode and also allows for easily implementing a "pipe-day" feature. Signed-off-by: Lukas Fleischer <calcurse@cryptocrack.de>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-23 06:40:42 +0000