summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Replace NEWS by CHANGES.mdLukas Fleischer2017-10-262-769/+810
| | | | | | | Use Markdown syntax for the release notes and rename the release notes file from NEWS to CHANGES.md. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Remove recognized keys checkLars Henriksen2017-10-261-36/+12
| | | | | | | All keys known by ncurses can be bound. Thus the check for not recognized keys in custom_keys_config() becomes superfluous. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix spelling of "frequency"Lars Henriksen2017-10-233-10/+8
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Support key bindings for all escape keysLars Henriksen2017-10-232-84/+95
| | | | | | | | | | | | | | | | | | | | | All key names for ordinary ASCII keys as well as for escape keys (pseudo keys) are cached in a lookup-table, keynames[], at startup. Mapping between key names (strings) and key codes (integers) in keys_str2int and keys_int2str) is performed through this table. The key names used are those returned by the keyname() function of ncurses. But to accommodate some of the names to the three-letter space available in the status menu, four ordinary keys and the most common escape keys have calcurse abbreviated names: ESC, TAB, RET, SPC and LFT, HOM, PgU, INS, F1, etc. All keys known by ncurses can be bound. Thus the check for not recognized keys in the key configuration menu becomes superfluous. The only keys that cannot be bound, are those escape keys not known to ncurses, i.e. not described by the terminfo database for the terminal type in use. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Updates for UTF-8 key bindingsLars Henriksen2017-10-232-38/+38
| | | | | | | | | | | | | | | | | | | | | Code point mapping adjusted for multibyte characters to avoid the ncurses range 0-KEY_MAX. This includes three fixes: 1) test sequence in keys_assign_binding(), 2) reassemble multi-byte character in keys_wgetch(), 3) check for already in use in keys_assign_binding(). Rearrangement of code. The introduction of allocated memory in keys_int2str() has as a consequence that check for recognized ncurses pseudo characters now are in two places: keys_str2int() and custom_keys_config(). The latter was moved from keys_wgetch() to improve user information. More informative warning messages in custom_keys_config(). Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* calcurse-caldav: Add --password command line argumentRandy Ramos2017-10-191-3/+5
| | | | | | | | The "--password" argument overrides the corresponding option in the config file. Signed-off-by: Randy Ramos <rramos1295@gmail.com> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Make delete key act as delete instead of backspacenobody2017-10-191-1/+1
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add CTRL-G readline shortcut to getstring()Quentin Hibon2017-10-191-0/+1
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Do not tie ISO 8601 week numbering to MondayLars Henriksen2017-10-171-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | The week number in the calendar panel is calculated according to ISO 8601. Hence, Monday is the first day of the week and the week number changes from Sunday to Monday. However, calcurse ties the week number not to Monday, but to the first day of the week as configured for display. Thus, when Sunday is shown as first day of the week, the week number is correct for Sunday, but wrong for the rest of the week (one behind). With this patch the week number always follows the mon-sun week as required by ISO 8601. A side effect is that when Sunday is displayed as first day of the week, and Sunday is the selected day, the week number displayed is invalid for the rest of the week (but changes to the correct one when the selected day moves forward). This raises the question whether the week numbering scheme should follow the "first day of the week" choice and use the American week numbering scheme instead of ISO 8601 when Sunday is the first day of the week. But that is for the future. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add calcurse-dateutilLukas Fleischer2017-09-081-0/+77
| | | | | | | | | | | | | | | | | Add a script to iterate over a certain date range, performing operations on each of the dates and printing the result. An additional string can be appended to each of the printed lines. The script can be used to create "extended recurrent events". For example ./calcurse-dateutil.py --date 2017-01-01 --range 365 --unique \ --append ' [1] Test event' bom next-weekday 3 skip-days 14 can be used to print an event for each third Thursday of each month in 2017. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Update calcurse-caldav documentation for OAuth2Randy Ramos2017-09-081-0/+90
| | | | | | | | Append instructions and information on synchronization with OAuth2-based services, specifically Google Calendar. Signed-off-by: Randy Ramos <rramos1295@gmail.com> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Rename README to README.mdRandy Ramos2017-09-081-2/+2
| | | | | | | | | This ensures that the Markdown syntax is properly displayed by Github and other Markdown readers. Also added quotes to a couple of paths and a flag. Signed-off-by: Randy Ramos <rramos1295@gmail.com> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add OAuth2 support for calcurse-caldavRandy Ramos2017-09-082-0/+124
| | | | | | | | | OAuth2 authentication is completely optional. It is controlled by the AuthMethod option in the config file. Other required options were appended to config.sample. Signed-off-by: Randy Ramos <rramos1295@gmail.com> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Refactor calcurse-caldav to use httplib2Randy Ramos2017-09-082-29/+17
| | | | | | | | | | This will allow much more flexibility and less code duplication when adding OAuth2 support. OAuth2 support will require this library as it is a dependency of oauth2client. The documentation was updated to reflect the new dependency. Signed-off-by: Randy Ramos <rramos1295@gmail.com> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Change remote_wipe to delete objects individuallyRandy Ramos2017-09-081-1/+3
| | | | | | | | | Certain CalDAV servers prohibit a single DELETE request to be sent to the calendar collection root. Instead items need to be deleted one by one. Signed-off-by: Randy Ramos <rramos1295@gmail.com> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* URL encode href before saving to sync.dbRandy Ramos2017-09-081-1/+2
| | | | | | | | | | When pushing objects, the unencoded uri path would be saved into the sync.db. The unencoded path and the encoded path from the server would be seen as two different objects, causing both to be resynced unnecessarily. Signed-off-by: Randy Ramos <rramos1295@gmail.com> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* git-version-gen: Add default versionLukas Fleischer2017-09-081-8/+4
| | | | | | | | | | | Instead of bailing out early in the build process when neither a version file nor a valid Git repository is detected, use a hardcoded default version string. This fixes building from shallow clones or Git snapshots. Also fixes GitHub issue #22. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Reload data after resolving save conflictLukas Fleischer2017-09-081-1/+10
| | | | | | | After resolving a save conflict with the merge tool, we need to reload the data files to import the result of the conflict resolution. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Unset modification flag after mergingLukas Fleischer2017-09-081-0/+2
| | | | | | | Turn off the local modification flag to avoid a bogus warning when reloading the data files immediately after the merge process. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Recompute hashes after savingLukas Fleischer2017-09-081-0/+3
| | | | | | | After saving the data files, we need to recompute and store the hashes to make sure the updated contents is reflected. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Factor out hash computationLukas Fleischer2017-09-081-7/+14
| | | | | | Move code to compute the hash of a data file to a separate function. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Use a shared input/output mutexLukas Fleischer2017-09-082-16/+23
| | | | | | | | | Replace the save mutex with a common mutex, which is locked whenever read or write operations on the data files are performed. Also, since this mutex is an implementation detail, mark the locking functions static and remove them from the header file. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Interrupt periodic save when launching processLukas Fleischer2017-09-081-0/+4
| | | | | | | | To avoid interactions between the periodic save thread and external processes, stop the periodic save thread before launching an external program and restart the thread as soon as the program is terminated. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Only reload if data files were changedLukas Fleischer2017-09-083-7/+15
| | | | | | | | Instead of blindly reloading data in io_reload_data(), compare the stored hashes of the data files with hashes of the current file contents and only reload if any of the hashes differs. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Factor out check for external modificationsLukas Fleischer2017-09-081-15/+20
| | | | | | | | Move the check to compare the stored hashes of the data files with the current hash to a separate function. This makes the code easier to read and reusable. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Do not blindly overwrite files when savingLukas Fleischer2017-09-081-0/+59
| | | | | | | | | When reading the data files, compute a cryptographic hash of the file contents and store it. When saving the files later, ensure that the hash still matches the current file contents. If it does not, show a warning to the user and ask whether she wants to execute the merge tool. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Use .new as file extension when mergingLukas Fleischer2017-09-081-15/+15
| | | | | | | | Using the file name extension .sav and naming the variables "backup" is slightly misleading, since the affected files actually contain the updated content and not some old snapshot. Use the term "new" instead. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Factor out merge routineLukas Fleischer2017-09-081-48/+44
| | | | | | | Move the code, which runs the merge tool with current and updated data files, to a separate function to make it reusable. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add CALCURSE_{EDITOR,PAGER,MERGETOOL} environment variablesLukas Fleischer2017-09-081-3/+9
| | | | | | | Support environment variables specific to calcurse to override $EDITOR, $PAGER and $MERGETOOL. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Make the day heading position configurableLars Henriksen2017-09-085-2/+62
| | | | | | | | | The date at the top of the appointments list may be positioned either to the left, in the middle or to the right. Default is to the right. Can be configured from the general options menu. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Remove phase of moon featureLars Henriksen2017-09-084-185/+2
| | | | | | | | | | The computation never really worked before and it seems like the feature is not very helpful, sometimes even confusing (see GitHub issue #21). The macro ISLEAP is moved to calcurse.h. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Fix phase of moon calculationLars Henriksen2017-09-081-27/+30
| | | | | | | | | | | | The reported phase was often one day early because calculations were based on midnight. For full and new moon this is changed to noon. For first and last quarter a direct check of the appearance of the half moon during the selected day is performed. Comments are relocated and expanded. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add missing string initializationLars Henriksen2017-09-041-0/+1
| | | | | | | | | | | When introducing the fmt_day_heading() function in commit d56cc7a (Make heading in appointments panel configurable, 2017-08-19), we forgot to initialize the dynamic string. This resulted in calling mem_free() with a garbage pointer, potentially resulting in a segmentation fault. Fix this by calling string_init() before using the string. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Replace remaining uses of wgetch() by keys_wgetch()Lukas Fleischer2017-09-033-3/+3
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add a function to wait for any key pressLukas Fleischer2017-09-037-26/+32
| | | | | | | Introduce a new function keys_wait_for_any_key() and use it instead of wgetch() whenever the return value is discarded. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Improve default selection when editing key bindingsLukas Fleischer2017-09-031-4/+4
| | | | | | | | When adding a new key binding, automatically select the new binding. When removing a key binding, keep the selection index (unless the last binding of a row is removed). Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Use strncpy() properly in general_option_edit()Lukas Fleischer2017-09-031-6/+8
| | | | | | | Always use strncpy() to copy strings between fixed-size buffers and pass the buffer size as maximal length parameter. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add support for UTF-8 key bindingsLukas Fleischer2017-08-303-30/+112
| | | | | | | | | | | | | | | | A new function keys_wgetch() reads full UTF-8 characters instead of single ASCII characters only. Key bindings for regular ASCII characters are stored in a hash map while the actions of keys with higher code points are stored in a linked list for space efficiency. The key serialization methods are updated to handle UTF-8 characters as well; extended UTF-8 characters (characters not in the ASCII range) are serialized by using the hexadecimal representation of the corresponding code points (e.g. "U+00E4"). Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Rename keys_getch() to keys_get()Lukas Fleischer2017-08-305-34/+29
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Factor out UTF-8 code point decodingLukas Fleischer2017-08-302-16/+16
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Relocate HANDLE_KEY macrosLukas Fleischer2017-08-301-46/+44
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Implement CTRL-U in getstring()Quentin Hibon2017-08-291-1/+7
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Use nl_langinfo() for month and day namesLars Henriksen2017-08-283-35/+8
| | | | | | | | Use the locale setting to fetch the month names and abbreviated day names. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Add basic Travis CI supportLukas Fleischer2017-08-281-0/+10
| | | | Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Remove extra star from recurrent appointmentsLars Henriksen2017-08-281-2/+1
| | | | | | | | | | | In the appointments panel, an appointment has a '-' to mark the time span, and the description on the following line is slightly indented. When the appointment is changed into a recurrent one, the '-' is changed to a '*', making it easily distinguishable but the description also gets a '*', thus breaking the pattern. Drop the extra '*'. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Remove some leftovers from the pastLars Henriksen2017-08-281-7/+0
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Rename README to README.mdLukas Fleischer2017-08-281-0/+0
| | | | | | | Make sure that the Markdown syntax already used in the README file is recognized by repository browsers such as cgit or GitHub. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Make heading in appointments panel configurableLars Henriksen2017-08-285-7/+40
| | | | | | | | Add a new configuration variable format.dayheading to set the format of the date displayed at the top of the event and appointment list. Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Extend strings API for formatted datesLukas Fleischer2017-08-282-0/+22
| | | | | | | | Add two new functions string_catftime(), resp. string_strftime(), which can be used to append, resp. print, a formatted date to a dynamic string. Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
* Make the selected day in the calendar stand outLars Henriksen2017-08-282-3/+3
| | | | | Signed-off-by: Lars Henriksen <LarsHenriksen@get2net.dk> Signed-off-by: Lukas Fleischer <lfleischer@calcurse.org>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-23 16:50:27 +0000