summaryrefslogtreecommitdiffstats
path: root/doc/manual.txt
diff options
context:
space:
mode:
Diffstat (limited to 'doc/manual.txt')
-rw-r--r--doc/manual.txt1112
1 files changed, 1112 insertions, 0 deletions
diff --git a/doc/manual.txt b/doc/manual.txt
new file mode 100644
index 0000000..563f9e2
--- /dev/null
+++ b/doc/manual.txt
@@ -0,0 +1,1112 @@
+////
+/*
+ * $calcurse: manual.txt,v 1.1 2011/02/24 11:36:50 fleischer Exp $
+ *
+ * Copyright (c) 2004-2010 Frederic Culot <frederic@culot.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the
+ * following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the
+ * following disclaimer in the documentation and/or other
+ * materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+////
+
+CALCURSE - text-based organizer
+===============================
+
+Abstract
+--------
+
+This manual describes `calcurse` functionnalities, and how to use them. The
+installation from source is first described, together with the available
+command line arguments. The user interface is then presented, with all of the
+customizable options that change `calcurse` behavior. Last, bug reporting
+procedure is explained, as well as the way one can contribute to `calcurse`
+development.
+
+Introduction
+------------
+
+`calcurse` is a text-based calendar and scheduling application. It helps
+keeping track of events, appointments and everyday tasks. A configurable
+notification system reminds user of upcoming deadlines, and the curses based
+interface can be customized to suit user needs. All of the commands are
+documented within an online help system.
+
+Overview
+--------
+
+Creation history
+~~~~~~~~~~~~~~~~
+
+I started thinking about this project when I was finishing my Ph.D. in
+Astrophysics... It started to be a little hard to organize myself, and I really
+needed a good tool to help me in that difficult task ;)
+
+I like programs which use Text User Interfaces, because they are simple, fast,
+portable and efficient, so I thought about working on coding a simple calendar
+using such an interface. Moreover, I wanted to go on learning the `C`
+language, which I only used for a while during my undergraduate studies. So I
+thought that would be the good project to start in order to get organized and
+to learn about a few `C` things !
+
+Unfortunately, I finished my Ph.D. before finishing `calcurse`, but anyway, I
+still wanted to work on it, hoping it would be helpful to other people. So
+here it is...
+
+But why _calcurse_ anyway ? Well, it is simply the concatenation of _CALendar_
+and _nCURSEs_, the name of the library used to build the user interface.
+
+Important features
+~~~~~~~~~~~~~~~~~~
+
+`Calcurse` is multi-platform and intended to be lightweight, fast and reliable.
+It is to be used inside a console or terminal, locally or on a distant machine
+within an ssh (or similar) connection.
+
+`Calcurse` can be run in two different modes : interactive or non-interactive
+mode. The first mode allows oneself to view its own personal organizer almost
+everywhere, thanks to the text-based interface. The second mode permits to
+easily build reminders just by adding `calcurse` with appropriate command line
+arguments inside a cron tab or within a shell init script.
+
+Moreover, `calcurse` was created with the end-user in mind, and tends to be as
+friendly as possible. This means a complete on-line help system, together with
+having all of the possible actions displayed at any time inside a status bar.
+The user interface is configurable, and one can choose between several color
+and layout combinations. Key bindings are also configurable, to fit everyone's
+needs. Last, a configurable notification system reminds user of upcoming
+appointments. The reminders are sent even if the user's interface is not
+running, as calcurse is able to run in background.
+
+Installation
+------------
+
+Requirements
+~~~~~~~~~~~~
+
+ncurses library
+^^^^^^^^^^^^^^^
+
+`Calcurse` requires only a `C` compiler, such as `cc` or `gcc`, and the
+`ncurses` library. It would be very surprising not to have a valid `ncurses`
+library already installed on your computer, but if not, you can find it at the
+following url: http://ftp.gnu.org/pub/gnu/ncurses/
+
+NOTE: It is also possible to link `calcurse` against the `ncursesw` library
+ (ncurses with support for unicode). However, UTF-8 is not yet supported
+ by `calcurse`.
+
+[[installation_requirements_gettext]]
+gettext library
+^^^^^^^^^^^^^^^
+
+`calcurse` supports internationalization (*i18n* hereafter) through the
+`gettext` utilities. This means `calcurse` can produce multi-lingual messages
+if compiled with native language support (i.e. *NLS*).
+
+However, *NLS* is optionnal and if you do not want to have support for
+multi-lingual messages, you can disable this feature. This is done by giving
+the `--disable-nls` option to `configure` (see section
+<<install_process,Install process>>). To check if the `gettext` utilities are
+installed on your system, you can search for the `libintl.h` header file for
+instance:
+
+----
+$ locate libintl.h
+----
+
+If this header file is not found, then you can obtain the `gettext` sources at
+the following url : http://ftp.gnu.org/pub/gnu/gettext/
+
+NOTE: Even if `libintl.h` is found on your system, it can be wise to specify
+ its location during the <<install_process,install process>>, by using the
+ `--with-libintl-prefix` option with `configure`. Indeed, the `configure`
+ could fail to locate this library if installed in an uncommon place.
+
+[[install_process]]
+Install process
+~~~~~~~~~~~~~~~
+
+First you need to gunzip and untar the source archive:
+
+----
+$ tar zxvf calcurse-2.8.tar.gz
+----
+
+Once you meet the requirements and have extracted the archive, the install
+process is quite simple, and follows the standard three steps process:
+
+----
+$ ./configure
+$ make
+$ make install # (may require root privilege)
+----
+
+Use `./configure --help` to obtain a list of possible options.
+
+calcurse basics
+---------------
+
+Invocation
+~~~~~~~~~~
+
+[[invocation_commandline]]
+Command line arguments
+^^^^^^^^^^^^^^^^^^^^^^
+
+`calcurse` takes the following options from the command line (both short and
+long options are supported):
+
+`-a, --appointment`::
+ Print the appointments and events for the current day and exit. The calendar
+ from which to read the appointments can be specified using the `-c` flag.
+
+`-c <file>, --calendar <file>`::
+ Specify the calendar file to use. The default calendar is
+ `~/.calcurse/apts` (see section <<basics_files,calcurse files>>).
+
+`-d <date|num>, --day <date|num>`::
+ Print the appointments for the given date or for the given number of
+ upcoming days, depending on the argument format. Two possible formats are
+ supported:
++
+--
+ * a date (possible formats described below).
+ * a number `n`.
+--
++
+In the first case, the appointment list for the specified date will be
+returned, while in the second case the appointment list for the `n` upcoming
+days will be returned. As an example, typing `calcurse -d 3` will display
+your appointments for today, tomorrow, and the day after tomorrow. Possible
+formats for specifying the date are defined inside the general configuration
+menu (see <<options_general,General options>>), using the
+`input_datefmt` variable.
++
+Note: as for the `-a` flag, the calendar from which to read the appointments
+can be specified using the `-c` flag.
+
+`-D <dir>, --directory <dir>`::
+ Specify the data directory to use. This option is incompatible with -c.
+ If not specified, the default directory is `~/.calcurse/`.
+
+`-h, --help`::
+ Print a short help text describing the supported command-line options,
+ and exit.
+
+`-i <file>, --import <file>`::
+ Import the icalendar data contained in `file`.
+
+`-n, --next`::
+ Print the next appointment within upcoming 24 hours and exit. The indicated
+ time is the number of hours and minutes left before this appointment.
++
+Note: the calendar from which to read the appointments can be specified using
+the `-c` flag.
+
+`-N, --note`::
+ When used with the `-a` or `-t` flag, also print note content if one is
+ associated with the displayed item.
+
+`-r[num], --range[=num]`::
+ Print events and appointments for the num number of days and exit. If no num
+ is given, a range of 1 day is considered.
+
+`-s[date], --startday[=date]`::
+ Print events and appointments from date and exit. If no date is given, the
+ current day is considered.
+
+`-S<regex>, --search=<regex>`::
+ When used with the `-a`, `-d`, `-r`, `-s`, or `-t` flag, print only the items
+ having a description that matches the given regular expression.
+
+`--status`::
+ Display the status of running instances of calcurse. If calcurse is
+ running, this will tell if the interactive mode was launched or if
+ calcurse is running in background. The process pid will also be indicated.
+
+`-t[num], --todo[=num]`::
+ Print the `todo` list and exit. If the optional number `num` is given, then
+ only todos having a priority equal to `num` will be returned. The priority
+ number must be between 1 (highest) and 9 (lowest). It is also possible to
+ specify `0` for the priority, in which case only completed tasks will be
+ shown.
+
+`-v, --version`::
+ Display `calcurse` version and exit.
+
+`-x[format], --export[=format]`::
+ Export user data to specified format. Events, appointments and todos are
+ converted and echoed to stdout. Two possible formats are available: ical and
+ pcal (see section <<links_others,Links>> below). If the optional
+ argument `format` is not given, ical format is selected by default.
++
+Note: redirect standard output to export data to a file, by issuing a command
+such as:
++
+----
+$ calcurse --export > my_data.dat
+----
+
+Environment variable for i18n
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+`calcurse` can be compiled with native language support (see
+<<install_requirements_gettext,gettext library>>). Thus, if you wish to have
+messages displayed into your native language, first make sure it is available
+by looking at the `po/LINGUAS` file. This file indicates the set of available
+languages by showing the two-letters corresponding code (for exemple, *fr*
+stands for french). If you do not find your language, it would be greatly
+appreciated if you could help translating `calcurse` (see the <<contribute,How
+to contribute?>> section).
+
+If your language is available, run `calcurse` with the following command:
+
+----
+$ LC_ALL=fr_FR calcurse
+----
+
+... where *fr_FR* is the locale name in this exemple, but should be replaced by
+the locale corresponding to the desired language.
+
+You should also specify the charset to be used, because in some cases the
+accents and such are not displayed correctly. This charset is indicated at the
+beginning of the po file corresponding to the desired language. For instance,
+you can see in the fr.po file that it uses the iso-8859-1 charset, so you could
+run `calcurse` using the following command:
+
+----
+$ LC_ALL=fr_FR.ISO8859-1 calcurse
+----
+
+Other environment variables
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following environment variables affect the way `calcurse` operates:
+
+`VISUAL`::
+ Specifies the external editor to use for writing notes.
+
+`EDITOR`::
+ If the `VISUAL` environment variable is not set, then `EDITOR` will be used
+ as the default external editor. If none of those variables are set, then
+ `/usr/bin/vi` is used instead.
+
+`PAGER`::
+ Specifies the default viewer to be used for reading notes. If this variable
+ is not set, then `/usr/bin/less` is used.
+
+User interface
+~~~~~~~~~~~~~~
+
+Non-interactive mode
+^^^^^^^^^^^^^^^^^^^^
+
+When called with at least one of the following arguments: `-a`, `-d`, `-h`,
+`-n`, `-t`, `-v`, `-x`, `calcurse` is started in non-interactive mode. This
+means the desired information will be displayed, and after that, `calcurse`
+simply quits and you are driven back to the shell prompt.
+
+That way, one can add a line such as `calcurse --todo --appointment` in its
+init config file to display at logon the list of tasks and appointments
+scheduled for the current day.
+
+[[basics_interface_interactive]]
+Interactive mode
+^^^^^^^^^^^^^^^^
+
+NOTE: Key bindings that are indicated in this manual correspond to the default
+ ones, defined when `calcurse` is launched for the first time. If those
+ key bindings do not suit user's needs, it is possible to change them
+ within the keys configuration menu (see <<options_keys,key bindings>>).
+
+When called without any argument or only with the `-c` option, `calcurse` is
+started in interactive mode. In this mode, you are shown an interface
+containing three different panels which you can browse using the `TAB` key,
+plus a notification bar and a status bar (see figure below).
+
+----
+ appointment panel---. .---calendar panel
+ | |
+ v v
+ +------------------------------------++----------------------------+
+ | Appointments || Calendar |
+ |------------------------------------||----------------------------|
+ | (|) April 6, 2006 || April 2006 |
+ | ||Mon Tue Wed Thu Fri Sat Sun |
+ | || 1 2 |
+ | || 3 4 5 6 7 8 9 |
+ | || 10 11 12 13 14 15 16 |
+ | || 17 18 19 20 21 22 23 |
+ | || 24 25 26 27 28 29 30 |
+ | || |
+ | |+----------------------------+
+ | |+----------------------------+
+ | || ToDo | todo
+ | ||----------------------------| panel
+ | || | |
+ | || | |
+ | || |<--.
+ | || |
+ +------------------------------------++----------------------------+
+ |---[ Mon 2006-11-22 | 10:11:43 ]---(apts)----> 01:20 :: lunch <---|<--.
+ +------------------------------------------------------------------+ notify-bar
+ | ? Help R Redraw H/L -/+1 Day G GoTo C Config |
+ | Q Quit S Save J/K -/+1 Week Tab Chg View |<-.
+ +------------------------------------------------------------------+ |
+ |
+ status bar
+----
+
+The first panel represents a calendar which allows to highlight a particular
+day, the second one contains the list of the events and appointments on that
+day, and the last one contains a list of tasks to do but which are not assigned
+to any specific day.
+
+Depending on the selected view, the calendar could either display a monthly
+(default as shown in previous figure) or weekly view. The weekly view would
+look like the following:
+
+----
++------------------------------------+
+| Calendar |
+|----------------------------(# 13)--|
+| Mon Tue Wed Thu Fri Sat Sun |
+| 29 30 31 01 02 03 04 |
+| <----+-- slice 1: 00:00 to 04:00 AM
+| -- -- -- -- -- -- |
+| <----+-- slice 2: 04:00 to 08:00 AM
+| -- -- -- -- -- -- |
+| <----+-- slice 3: 08:00 to 12:00 AM
+| - -- -- -- -- -- -- - <-+-- midday
+| <----+-- slice 4: 12:00 to 04:00 PM
+| -- -- -- -- -- -- |
+| <----+-- slice 5: 04:00 to 08:00 PM
+| -- -- -- -- -- -- |
+| <----+-- slice 6: 08:00 to 12:00 PM
++------------------------------------+
+----
+
+The current week number is displayed on the top-right side of the panel (*# 13*
+meaning it is the 13th week of the year in the above example). The seven days
+of the current week are displayed in column. Each day is divided into slices of
+4 hours each (6 slices in total, see figure above). A slice will appear in a
+different color if an appointment falls into the corresponding time-slot.
+
+In the appointment panel, one can notice the *`(|)`* sign just in front of the
+date. This indicates the current phase of the moon. Depending on which is the
+current phase, the following signs can be seen:
+
+` |) `::
+ first quarter
+
+` (|) `::
+ full moon
+
+` (| `::
+ last quarter
+
+` | `::
+ new moon
+
+no sign::
+ Phase of the moon does not correspond to any of the above ones.
+
+At the very bottom of the screen there is a status bar, which indicates the
+possible actions and the corresponding keystrokes.
+
+Just above this status bar is the notify-bar, which indicates from left to
+right : the current date, the current time, the calendar file currently in use
+(apts on the above example, which is the default calendar file, see the
+following section), and the next appointment within the upcoming 24 hours. Here
+it says that it will be lunch time in one hour and twenty minutes.
+
+NOTE: Some actions, such as editing or adding an item, require to type in some
+ text. This is done with the help of the built-in input line editor.
+
+Within this editor, if a line is longer than the screen width, a `>`, `*`, or
+`<` character is displayed in the last column indicating that there are more
+character after, before and after, or before the current position,
+respectively. The line is scrolled horizontally as necessary.
+
+Moreover, some editing commands are bound to particular control characters.
+Hereafter are indicated the available editing commands (`^` stands for the
+control key):
+
+`^a`::
+ moves the cursor to the beginning of the input line
+
+`^b`::
+ moves the cursor backward
+
+`^d`::
+ deletes one character forward
+
+`^e`::
+ moves the cursor to the end of the input line
+
+`^f`::
+ moves the cursor forward
+
+`^h`::
+ deletes one character backward
+
+`^k`::
+ deletes the input from the cursor to the end of the line
+
+`ESCAPE`::
+ cancels the editing
+
+[[basics_daemon]]
+Background mode
+~~~~~~~~~~~~~~~
+
+When the daemon mode is enabled in the notification configuration menu (see
+<<options_notify,Notify-bar settings>>), `calcurse` will stay in background
+when the user interface is not running. In background mode, `calcurse` checks
+for upcoming appointments and runs the user-defined notification command when
+ necessary. When the user interface is started again, the daemon automatically
+ stops.
+
+`calcurse` background activity can be logged (set the `notify-daemon_log`
+variable in the notification configuration <<options_notify,menu>>),
+and in that case, information about the daemon start and stop time, reminders'
+command launch time, signals received... will be written in the `daemon.log`
+file (see section <<basics_files,files>>).
+
+Using the `--status` command line option (see section
+<<basics_invocation_commandline,Command line arguments>>), one can know if
+`calcurse` is currently running in background or not. If the daemon is
+running, a message like the following one will be displayed (the pid of the
+daemon process will be shown):
+
+----
+calcurse is running in background (pid 14536)
+----
+
+NOTE: To stop the daemon, just send the `TERM` signal to it, using a command
+ such as: `kill daemon_pid`, where *daemon_pid* is the process id of the
+ daemon (14536 in the above example).
+
+[[basics_files]]
+calcurse files
+~~~~~~~~~~~~~~
+
+The following structure is created in your `$HOME` directory (or in the
+directory you specified with the -D option) the first time `calcurse` is run
+:
+
+----
+$HOME/.calcurse/
+ |___notes/
+ |___conf
+ |___keys
+ |___apts
+ |___todo
+----
+`notes/`::
+ this subdirectory contains descriptions of the notes which are attached to
+ appointments, events or todos. One text file is created per note, whose name
+ is built using mkstemp(3) and should be unique, but with no relation with the
+ corresponding item's description.
+`conf`::
+ this file contains the user configuration
+`keys`::
+ this file contains the user-defined key bindings
+`apts`::
+ this file contains all of the events and user's appointments
+`todo`::
+ this file contains the todo list
+
+NOTE: If the logging of calcurse daemon activity was set in the notification
+ configuration menu, the extra file `daemon.log` will appear in calcurse
+ data directory. This file contains logs about calcurse activity when
+ running in background.
+
+Import/Export capabilities
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The import and export capabilities offered by `calcurse` are described below.
+
+Import
+^^^^^^
+
+Data in icalendar format as described in the rfc2445 specification (see
+<<links_others,links>> section below) can be imported into calcurse. Calcurse
+ical parser is based on version 2.0 of this specification, but for now on, only
+a subset of it is supported.
+
+The following icalendar properties are handled by calcurse:
+
+* `VTODO` items: "PRIORITY", "VALARM", "SUMMARY", "DESCRIPTION"
+
+* `VEVENT` items: "DTSTART", "DTEND", "DURATION", "RRULE", "EXDATE", "VALARM",
+ "SUMMARY", "DESCRIPTION"
+
+The icalendar `DESCRIPTION` property will be converted into calcurse format by
+adding a note to the item. If a "VALARM" property is found, the item will be
+flagged as important and the user will get a notification (this is only
+applicable to appointments).
+
+Here are the properties that are not implemented:
+
+* negative time durations are not taken into account (item is skipped)
+
+* some recurence frequences are not recognize: "SECONDLY" / "MINUTELY" /
+ "HOURLY"
+
+* some recurrence keywords are not recognized (all those starting with `BY`):
+ "BYSECOND" / "BYMINUTE" / "BYHOUR" / "BYDAY" / "BYMONTHDAY" / "BYYEARDAY" /
+ "BYWEEKNO" / "BYMONTH" / "BYSETPOS" plus "WKST"
+
+* the recurrence exception keyword "EXRULE" is not recognized
+
+* timezones are not taken into account
+
+Export
+^^^^^^
+
+Two possible export formats are available: `ical` and `pcal` (see section
+<<links_others,Links>> below to find out about those formats).
+
+Online help
+~~~~~~~~~~~
+
+At any time, the built-in help system can be invoked by pressing the `?`
+key. Once viewing the help screens, informations on a specific command can be
+accessed by pressing the keystroke corresponding to that command.
+
+Options
+-------
+
+All of the `calcurse` parameters are configurable from the Configuration menu
+available when pressing `C`. You are then driven to a submenu with five
+possible choices : pressing `C` again will lead you to the Color scheme
+configuration, pressing `L` allows you to choose the layout of the main
+`calcurse` screen (in other words, where to put the three different panels on
+screen), pressing `G` permits you to choose between different general options,
+pressing `K` opens the key bindings configuration menu, and last you can modify
+the notify-bar settings by pressing `N`.
+
+[[options_general]]
+General options
+~~~~~~~~~~~~~~~
+
+These options control `calcurse` general behavior, as described below:
+
+`auto_save` (default: *yes*)::
+ This option allows to automatically save the user's data (if set to *yes*)
+ when quitting. <p class="rq"><span class="valorise">warning:</span> No data
+ will be automatically saved if `auto_save` is set to *no*. This means the
+ user must press `S` (for saving) in order to retrieve its modifications.
+
+`periodic_save` (default: *0*)::
+ If different from `0`, user's data will be automatically saved every
+ *periodic_save* minutes. When an automatic save is performed, two asterisks
+ (i.e. `**`) will appear on the top right-hand side of the screen).
+
+`confirm_quit` (default: *yes*)::
+ If set to *yes*, confirmation is required before quitting, otherwise pressing
+ `Q` will cause `calcurse` to quit without prompting for user confirmation.
+
+`confirm_delete` (default: *yes*)::
+ If this option is set to *yes*, pressing `D` for deleting an item (either a
+ *todo*, *appointment*, or *event*), will lead to a prompt asking for user
+ confirmation before removing the selected item from the list. Otherwise, no
+ confirmation will be needed before deleting the item.
+
+`skip_system_dialogs` (default: *no*)::
+ Setting this option to *yes* will result in skipping the system dialogs
+ related to the saving and loading of data. This can be useful to speed up
+ the input/output processes.
+
+`skip_progress_bar` (default: *no*)::
+ If set to *yes*, this will cause the disappearing of the progress bar which
+ is usually shown when saving data to file. If set to *no*, this bar will be
+ displayed, together with the name of the file being saved (see section
+ <<basics_files,calcurse files>>).
+
+`calendar_default_view` (default: *0*)::
+ If set to `0`, the monthly calendar view will be displayed by default
+ otherwise it is the weekly view that will be displayed.
+
+`week_begins_on_monday` (default: *yes*)::
+ One can choose between Monday and Sunday as the first day of the week. If the
+ option `week_begins_on_monday` is set to *yes*, Monday will be first in the
+ calendar view. Else if the option is set to *no*, then Sunday will be the
+ first day of the week.
+
+`output_datefmt` (default: *%D*)::
+ This option indicates the format to be used when displaying dates in
+ non-interactive mode. Using the default values, dates are displayed the
+ following way: *mm/dd/aa*. You can see all of the possible formats by typing
+ `man 3 strftime` inside a terminal.
+
+`input_datefmt` (default: *1*)::
+ This option indicates the format that will be used to enter dates in
+ *calcurse*. Four choices are available:
++
+1. mm/dd/yyyy
+2. dd/mm/yyyy
+3. yyyy/mm/dd
+4. yyyy-mm-dd
+
+[[options_keys]]
+Key bindings
+~~~~~~~~~~~~
+
+One can define it's own keybindings within the `Keys` configuration menu. The
+default keys look like the one used by the `vim` editor, especially the
+displacement keys. Anyway, within this configuration menu, users can redefine
+all of the keys available from within calcurse's user interface.
+
+To define new keybindings, first highlight the action to which it will apply.
+Then, delete the actual key binding if necessary, and add a new one. You will
+then be asked to press the key corresponding to the new binding. It is possible
+to define more than one key binding for a single action.
+
+An automatic check is performed to see if the new key binding is not already
+set for another action. In that case, you will be asked to choose a different
+one. Another check is done when exiting from this menu, to make sure all
+possible actions have a key associated with it.
+
+The following keys can be used to define bindings:
+
+* lower-case, upper-case letters and numbers, such as `a`, `Z`, `0`
+
+* CONTROL-key followed by one of the above letters
+
+* escape, horizontal tab, and space keys
+
+* arrow keys (up, down, left, and right)
+
+* `HOME` and `END` keys
+
+While inside the key configuration menu, an online help is available for each
+one of the available actions. This help briefly describes what the highlighted
+action is used for.
+
+Color themes
+~~~~~~~~~~~~
+
+`calcurse` color theme can be customized to suit user's needs. To change the
+default theme, the configuration page displays possible choices for foreground
+and background colors. Using arrows or calcurse displacement keys to move, and
+`X` or space to select a color, user can preview the theme which will be
+applied. It is possible to keep the terminal's default colors by selecting the
+corresponding choice in the list.
+
+The chosen color theme will then be applied to the panel borders, to the
+titles, to the keystrokes, and to general informations displayed inside status
+bar. A black and white theme is also available, in order to support non-color
+terminals.
+
+NOTE: Depending on your terminal type and on the value of the `$TERM`
+ environnement variable, color could or could not be supported. An error
+ message will appear if you try to change colors whereas your terminal
+ does not support this feature. If you do know your terminal supports
+ colors but could not get `calcurse` to display them, try to set your
+ `$TERM` variable to another value (such as *xterm-xfree86* for instance).
+
+Layout configuration
+~~~~~~~~~~~~~~~~~~~~
+
+The layout corresponds to the position of the panels inside `calcurse` screen.
+The default layout makes the calendar panel to be displayed on the top-right
+corner of the terminal, the todo panel on the bottom-right corner, while the
+appointment panel is displayed on the left hand-side of the screen (see the
+figure in section <<basics_interface_interactive,Interactive mode>> for an
+exemple of the default layout). By choosing another layout in the
+configuration screen, user can customize `calcurse` appearence to best suit his
+needs by placing the different panels where needed.
+
+The following option is used to modify the layout configuration:
+
+`layout` (default: *0*)::
+ Eight different layouts are to be chosen from (see layout configuration
+ screen for the description of the available layouts).
+
+Sidebar configuration
+~~~~~~~~~~~~~~~~~~~~~
+
+The sidebar is the part of the screen which contains two panels: the calendar
+and, depending on the chosen layout, either the todo list or the appointment
+list.
+
+The following option is used to change the width of the sidebar:
+
+`side-bar_width` (default: *0*)::
+ Width (in percentage, 0 being the minimum width) of the side bar.
+
+[[options_notify]]
+Notify-bar settings
+~~~~~~~~~~~~~~~~~~~
+
+The following options are used to modify the notify-bar behavior:
+
+`notify-bar_show` (default: *yes*)::
+ This option indicates if you want the notify-bar to be displayed or not.
+
+`notify-bar_date` (default: *%a %F*)::
+ With this option, you can specify the format to be used to display the
+ current date inside the notification bar. You can see all of the possible
+ formats by typing `man 3 strftime` inside a terminal.
+
+`notify-bar_time` (default: *%T*)::
+ With this option, you can specify the format to be used to display the
+ current time inside the notification bar. You can see all of the possible
+ formats by typing `man 3 strftime` inside a terminal.
+
+`notify-bar_warning` (default: *300*)::
+ When there is an appointment which is flagged as `important` within the next
+ `notify-bar_warning` seconds, the display of that appointment inside the
+ notify-bar starts to blink. Moreover, the command defined by the
+ `notify-bar_command` option will be launched. That way, the user is warned
+ and knows there will be soon an upcoming appointment.
+
+`notify-bar_command` (default: *printf '\a'*)::
+ This option indicates which command is to be launched when there is an
+ upcoming appointment flagged as `important`. This command will be passed to
+ the user's shell which will interpret it. To know what shell must be used,
+ the content of the `$SHELL` environment variable is used. If this variable is
+ not set, `/bin/sh` is used instead.
++
+====
+Say the `mail` command is available on the user's system, one can use the
+following command to get notified by mail of an upcoming appointment (the
+appointment description will also be mentioned in the mail body):
+
+----
+$ calcurse --next | mail -s "[calcurse] upcoming appointment!" user@host.com
+----
+====
+
+`notify-daemon_enable` (default: *no*)::
+ If set to yes, daemon mode will be enabled, meaning `calcurse` will run into
+ background when the user's interface is exited. This will allow the
+ notifications to be launched even when the interface is not running. More
+ details can be found in section <<basics_daemon,Background mode>>.
+
+`notify-daemon_log` (default: *no*)::
+ If set to yes, `calcurse` daemon activity will be logged (see section
+ <<basics_files,files>>).
+
+Known bugs
+----------
+
+Incorrect highlighting of items appear when using calcurse black and white
+theme together with a `$TERM` variable set to *xterm-color*. To fix this bug,
+and as advised by Thomas E. Dickey (`xterm` maintainer), *xterm-xfree86* should
+be used instead of *xterm-color* to set the `$TERM` variable:
+
+____
+"The xterm-color value for $TERM is a bad choice for XFree86 xterm because it
+is commonly used for a terminfo entry which happens to not support bce. Use the
+xterm-xfree86 entry which is distributed with XFree86 xterm (or the similar one
+distributed with ncurses)."
+____
+
+[[bugs]]
+Reporting bugs and feedback
+---------------------------
+
+Please send bug reports and feedback to: `calcurse .at. culot .dot. org` or to
+the author: `frederic .at. culot .dot. org`.
+
+[[contribute]]
+How to contribute?
+------------------
+
+If you would like to contribute to the project, you can first send your
+feedback on what you like or dislike, and if there are features you miss in
+`calcurse`. For now on, possible contributions concern the translation of
+`calcurse` messages and documentation.
+
+NOTE: any help in getting `calcurse` internationalized would be very welcomed,
+ but before contributing, send a mail to `calcurse-i18n .at. culot .dot.
+ org` to know if someone already started the translation process into your
+ language.
+
+Translating documentation
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The *doc/* directory of the source package already contains translated version
+of `calcurse` manual. However, if the manual is not yet available into your
+native language, it would be appreciated if you could help translating it.
+
+To do so, just copy one of the existing manual file to `manual_XX.html`, where
+*XX* identifies your language. Then translate this newly created file and send
+it to the author (see <<bugs,Reporting bugs and feeback>>), so that it can be
+included in the next `calcurse` release.
+
+calcurse i18n
+~~~~~~~~~~~~~
+
+As already mentioned, `gettext` utilities are used by `calcurse` to produce
+multi-lingual messages. This section provides informations about how to
+translate those messages into your native language. However, this howto is
+deliberately incomplete, focusing on working with `gettext` for `calcurse`
+specifically. For more comprehensive informations or to grasp the Big Picture
+of Native Language Support, you should refer to the `GNU gettext` manual at:
+http://www.gnu.org/software/gettext/manual/
+
+Basically, three different people get involved in the translation chain:
+coders, language coordinator, and translators. After a quick overview of how
+things work, the translator tasks will be described hereafter.
+
+Overview
+^^^^^^^^
+
+To be able to display texts in the native language of the user, two steps are
+required: *internationalization* (i18n) and *localization* (l10n).
+
+i18n is about making `calcurse` support multiple languages. It is performed by
+coders, who will mark translatable texts and provide a way to display them
+translated at runtime.
+
+l10n is about making the i18n'ed `calcurse` adapt to the specific language of
+the user, ie translating the strings previously marked by the developers, and
+setting the environment correctly for `calcurse` to use the result of this
+translation.
+
+So, translatable strings are first marked by the coders within the `C` source
+files, then gathered in a template file (*calcurse.pot* - the *pot* extension
+meaning *portable object template*). The content of this template file is then
+merged with the translation files for each language (*fr.po* for french, for
+instance - with *po* standing for *portable object*, ie meant to be read and
+edited by humans). A given translation team will take this file, translate its
+strings, and send it back to the developers. At compilation time, a binary
+version of this file (for efficiency reasons) will be produced (*fr.mo* - *mo*
+stands for *machine object*, ie meant to be read by programs), and then
+installed. Then `calcurse` will use this file at runtime, translating the
+strings according to the locale settings of the user.
+
+
+Translator tasks
+^^^^^^^^^^^^^^^^
+
+Suppose someone wants to initiate the translation of a new language. Here are
+the steps to follow:
+
+* First, find out what the locale name is. For instance, for french, it is
+ `fr_FR`, or simply `fr`. This is the value the user will have to put in his
+ `LC_ALL` environment variable for software to be translated (see
+ <<basics_invocation_variable,Environment variable for i18n>>).
+
+* Then, go into the *po/* directory, and create a new po-file
+ from the template file using the following command: `msginit -i calcurse.pot
+ -o fr.po -l fr --no-translator` If you do not have `msginit` installed on
+ your system, simply copy the *calcurse.pot* file to *fr.po* and edit the
+ header by hand.
+
+Now, having this *fr.po* file, the translator is ready to begin.
+
+po-files
+^^^^^^^^
+
+The format of the po-files is quite simple. Indeed, po-files are made of four
+things:
+
+1. *location lines:* tells you where the strings can be seen (name of file and
+ line number), in case you need to see a bit of context.
+
+2. *msgid lines:* the strings to translate.
+
+3. *msgstr lines:* the translated strings.
+
+4. *lines prefixed with `#`:* comments (some with a special meaning, as we will
+ see below).
+
+Basically, all you have to do is fill the *msgstr* lines with the translation
+of the above *msgid* line.
+
+A few notes:
+
+*Fuzzy strings*::
+ You will meet strings marked with a `"#, fuzzy"` comment. `calcurse` won't
+ use the translations of such strings until you do something about them. A
+ string being fuzzy means either that the string has already been translated
+ but has since been changed in the sources of the program, or that this is a
+ new string for which `gettext` made a 'wild guess' for the translation, based
+ on other strings in the file. It means you have to review the translation.
+ Sometimes, the original string has changed just because a typo has been
+ fixed. In this case, you won't have to change anything. But sometimes, the
+ translation will no longer be accurate and needs to be changed. Once you are
+ done and happy with the translation, just remove the `"#, fuzzy"` line, and
+ the translation will be used again in `calcurse`.
+
+*c-format strings and special sequences*::
+ Some strings have the following comment: `"#, c-format"`. This tells that
+ parts of the string to translate have a special meaning for the program, and
+ that you should leave them alone. For instance, %-sequences, like `"%s"`.
+ These means that `calcurse` will replace them with another string. So it is
+ important it remains. There are also \-sequences, like `\n` or `\t`. Leave
+ them, too. The former represents an end of line, the latter a tabulation.
+
+*Translations can be wrapped*::
+ If lines are too long, you can just break them like this:
++
+----
+msgid ""
+"some very long line"
+"another line"
+----
+
+*po-file header*::
+ At the very beginning of the po-file, the first string form a header, where
+ various kind of information has to be filled in. Most important one is the
+ charset. It should resemble
++
+----
+"Content-Type: text/plain; charset=utf-8\n"
+----
++
+You should also fill in the Last-Translator field, so that potential
+contributors can contact you if they want to join you in the translation team,
+or have remarks/typo fixes to give about the translations. You can either just
+give your name/nick, or add an email address, for exemple:
++
+----
+"Last-Translator: Frederic Culot <frederic@culot.org>\n"
+----
+
+*Comments*::
+ Adding comments (lines begining with the `#` character) can be a good way to
+ point out problems or translation difficulties to proofreaders or other
+ members of your team.
+
+*Strings size*::
+ `calcurse` is a curses/console program, thus it can be heavily dependant on
+ the terminal size (number of columns). You should think about this when
+ translating. Often, a string must fit into a single line (standard length is
+ 80 characters). Don't translate blindly, try to look where your string will
+ be displayed to adapt your translation.
+
+*A few useful tools*::
+ The po-file format is very simple, and the file can be edited with a standard
+ text editor. But if you prefer, there are few specialized tools you may find
+ convenient for translating:
++
+* `poEdit` (http://www.poedit.org/)
+* `KBabel` (http://i18n.kde.org/tools/kbabel/)
+* `GTranslator` (http://gtranslator.sourceforge.net/)
+* `Emacs` po mode
+* `Vim` po mode
+
+*And finally*::
+ I hope you'll have fun contributing to a more internationalized world. :) If
+ you have any more questions, don't hesitate to contact me at *frederic .at.
+ culot .dot. org*.
+
+Links
+-----
+
+This section contains links and references that may be of interest to you.
+
+calcurse homepage
+~~~~~~~~~~~~~~~~~
+
+The `calcurse` homepage can be found at http://culot.org/calcurse
+
+calcurse announce list
+~~~~~~~~~~~~~~~~~~~~~~
+
+If you are interested in the project and want to be warned when a new release
+comes out, you can subscribe to the `calcurse` announce list. In doing so, you
+will receive an email as soon as a new feature appears in `calcurse`.
+
+To subscribe to this list, send a message to *calcurse-announce .at. culot
+.dot. org* with "subscribe" in the subject field.
+
+calcurse RSS feed
+~~~~~~~~~~~~~~~~~
+
+Another possibility to get warned when new releases come out is to follow the
+RSS feed at: http://culot.org/calcurse/news_rss.xml
+
+This RSS feed is updated each time a new version of calcurse is available,
+describing newly added features.
+
+[[links_others]]
+Other links
+~~~~~~~~~~~
+
+You may want to look at the ical format specification (rfc2445) at:
+http://tools.ietf.org/html/rfc2445
+
+The pcal project page can be found at: http://pcal.sourceforge.net/
+
+Thanks
+------
+
+Its time now to thank other people without whom this program would not exist!
+So here is a list of contributing persons I would like to thank :
+
+* Alex for its patches, help and advices with `C` programming
+
+* Gwen for testing and general discussions about how to improve `calcurse`
+
+* Herbert for packaging `calcurse` for FreeBSD
+
+* Zul for packaging `calcurse` for NetBSD
+
+* Wain, Steffen and Ronald for packaging `calcurse` for Archlinux
+
+* Kevin, Ryan, and fEnIo for packaging `calcurse` for Debian and Ubuntu
+
+* Pascal for packaging `calcurse` for Slackware
+
+* Alexandre and Markus for packaging `calcurse` for Mac OsX and Darwin
+
+* Igor for packaging `calcurse` for ALT Linux
+
+* Joel for its calendar script which inspired `calcurse` calendar view
+
+* Michael Schulz and Chris M. for the german translation of `calcurse` and its
+ manual
+
+* Jose Lopez for the spanish translation of `calcurse` and its manual
+
+* Neil Williams for the english translation
+
+* Leandro Noferini for the italian translation
+
+* Tony for its patch which helped improving the recur_item_inday() function,
+ and for implementing the date format configuration options
+
+* Jeremy Roon for the dutch translation
+
+* Erik Saule for its patch implementing the `-N`, `-s`, `-S`, `-r` and `-D`
+ flags
+
+* people who write softwares I like and which inspired me, especially :
+
+ - `vim` for the displacement keys
+ - `orpheus` and `abook` for documentation
+ - `pine` and `aptitude` for the text user interface
+ - `tmux` for coding style
+
+And last, many many thanks to all of the `calcurse` users who sent me their
+feedback.