////
/*
* Copyright (c) 2004-2015 calcurse Development Team <misc@calcurse.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the
* following disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the
* following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
////
calcurse(1)
===========
Name
----
calcurse - text-based organizer
Synopsis
--------
[verse]
'calcurse' *-Q* [options] [*--from* <date>] [*--to* <date>|*--days* <num>]
'calcurse' *-G* [options]
'calcurse' *-i*<file>
'calcurse' *-x*<format>
'calcurse' *--gc*
'calcurse' *--status*
'calcurse' *--version*
'calcurse' *--help*
Description
-----------
Calcurse is a text-based calendar and scheduling application. It helps keeping
track of events, appointments and everyday tasks. A configurable notification
system reminds user of upcoming deadlines, and the curses based interface can
be customized to suit user needs. All of the commands are documented within an
online help system.
Options
-------
The following options are supported:
*-a*, *--appointment*::
Print the appointments and events for the current day and exit. Equivalent to
*-Q --filter-type cal*. 'Note:' The calendar from which to read the
appointments can be specified using the *-c* flag.
*-c* <file>, *--calendar* <file>::
Specify the calendar file to use. The default calendar is *~/.calcurse/apts*
(see section 'FILES' below). This option has precedence over *-D*.
*-d* <date|num>, *--day* <date|num>::
Print the appointments for the given date or for the given number of
upcoming days, depending on the argument format. Two possible formats are
supported:
+
--
* a date (possible formats described below).
* a number *n*.
--
+
In the first case, the appointment list for the specified date will be
returned, while in the second case the appointment list for the *n* upcoming
days will be returned.
+
As an example, typing *calcurse -d 3* will display your appointments for
today, tomorrow, and the day after tomorrow. The first form is equivalent to
*-Q --filter-type cal --from <date>*, the second form is equivalent to *-Q
--filter-type cal --days <num>*.
+
'Note:' as for the *-a* flag, the calendar from which to read the
appointments can be specified using the *-c* flag.
*--days* <num>::
Specify the length of the range (in days) when used with *-Q*. Cannot be
combined with *--to*.
*--export-uid*::
When exporting items, add the hash of each item to the exported object as an
UID property.
*-D* <dir>, *--directory* <dir>::
Specify the data directory to use. If not specified, the default directory is
*~/.calcurse/*.
*-F*, *--filter*::
Read items from the data files and write them back. The filter interface can
be used to drop specific items. Be careful with this option, specifying a
wrong filter might result it data loss! It is highly recommended to test the
effect of filters with -G first. See also: 'Filter Options'.
*--from* <date>::
Specify the start date of the range when used with *-Q*.
*-g*, *--gc*::
Run the garbage collector for note files and exit.
*-G*, *--grep*::
Print appointments and TODO items using the calcurse data file format. The
filter interface can be used to further restrict the output. See also:
'Filter Options'.
*-h*, *--help*::
Print a short help text describing the supported command-line options,
and exit.
*-i* <file>, *--import* <file>::
Import the icalendar data contained in 'file'.
*-l* <num>, *--limit* <num>::
Limit the number of results printed to 'num'.
*--list-imported*::
When importing items, print the hash of each newly created object to stdout.
*-n*, *--next*::
Print the next appointment within upcoming 24 hours and exit. The indicated
time is the number of hours and minutes left before this appointment.
+
'Note:' the calendar from which to read the appointments can be specified using
the *-c* flag.
*-q*, *--quiet*::
Be quiet. Do not show system dialogs.
*-Q*, *--query*::
Print all appointments inside a given query range, followed by all TODO
items. The query range defaults to the current day and can be changed by
using the *--from* and *--to* (or *--days*) parameters. The filter interface
can be used to further restrict the output. See also: 'Filter Options',
'Formatting Options'.
*-r*[num], *--range*[=num]::
Print events and appointments for the 'num' number of days and exit. If no
'num' is given, a range of 1 day is considered. Equivalent to *-Q
--filter-type cal --days <num>*.
*--read-only*::
Don't save configuration nor appointments/todos.
+
'Warning:' Use this this with care! If you run an interactive calcurse instance
in read-only mode, all changes from this session will be lost without warning!
*-s*[date], *--startday*[=date]::
Print events and appointments from 'date' and exit. If no 'date' is given,
the current day is considered. Equivalent to *-Q --filter-type cal --from
<date>*.
*-S*<regex>, *--search*=<regex>::
When used with the *-a*, *-d*, *-r*, *-s*, or *-t* flag, print only the items
having a description that matches the given regular expression. Equivalent to
*-Q --filter-pattern <regex>*.
*--status*::
Display the status of running instances of calcurse. If calcurse is
running, this will tell if the interactive mode was launched or if
calcurse is running in background. The process pid will also be indicated.
*-t*[num], *--todo*[=num]::
Print the *todo* list and exit. If the optional number 'num' is given, then
only todos having a priority equal to 'num' will be returned. The priority
number must be between 1 (highest) and 9 (lowest). It is also possible to
specify *0* for the priority, in which case only completed tasks will be
shown. Equivalent to *-Q --filter-type todo*, combined with
*--filter-priority* and *--filter-completed* or *--filter-uncompleted*.
*--to* <date>::
Specify the end date of the range when used with *-Q*. Cannot be combined
with *--days*.
*-v*, *--version*::
Display *calcurse* version and exit.
*-x*[format], *--export*[=format]::
Export user data to specified format. Events, appointments and todos are
converted and echoed to stdout. Two possible formats are available: 'ical'
and 'pcal'. If the optional argument 'format' is not given, ical format is
selected by default.
+
'Note:' redirect standard output to export data to a file, by issuing a command
such as:
+
----
$ calcurse --export > my_data.dat
----
'Note:' The *-N* option has been removed in calcurse 3.0.0. See the 'FORMAT
STRINGS' section on how to print note along with appointments and events.
Filter Options
~~~~~~~~~~~~~~
Filters can be used to restrict the set of items which are loaded from the
appointments file when using calcurse in non-interactive mode. The following
filters are currently supported:
*--filter-hash <pattern>*::
Only include items with a hash starting with the specified pattern. The
pattern can be inverted by prepending an exclamation mark ('!').
*--filter-type* <type>::
Ignore any items that do not match the type mask. The type mask is a
comma-separated list of valid type descriptions which include 'event', 'apt',
'recur-event', 'recur-apt' and 'todo'. You can also use 'recur' as a
shorthand for 'recur-event,recur-apt' and 'cal' as a shorthand for
'event,apt,recur'.
*--filter-pattern* <pattern>::
Ignore any items with a description that does not match the pattern. The
pattern is interpreted as extended regular expression.
*--filter-start-from* <date>::
Ignore any items that start before a given date.
*--filter-start-to* <date>::
Ignore any items that start after a given date.
*--filter-start-after* <date>::
Only include items that start after a given date.
*--filter-start-before* <date>::
Only include items that start before a given date.
*--filter-start-range* <range>::
Only include items with a start date that falls within a given range. A range
consists of a start date and an end date, separated by a comma.
*--filter-end-from* <date>::
Ignore any items that end before a given date.
*--filter-end-to* <date>::
Ignore any items that end after a given date.
*--filter-end-after* <date>::
Only include items that end after a given date.
*--filter-end-before* <date>::
Only include items that end before a given date.
*--filter-end-range* <range>::
Only include items with an end date that falls within a given range. A range
consists of a start date and an end date, separated by a comma.
*--filter-priority* <priority>::
Only include items with a given priority.
*--filter-completed*::
Only include completed TODO items.
*--filter-uncompleted*::
Only include uncompleted TODO items.
Formatting Options
~~~~~~~~~~~~~~~~~~
*--format-apt* <format>::
Specify a format to control the output of appointments in non-interactive
mode. See the 'FORMAT STRINGS' section for detailed information on format
strings.
*--format-recur-apt* <format>::
Specify a format to control the output of recurrent appointments in
non-interactive mode. See the 'FORMAT STRINGS' section for detailed
information on format strings.
*--format-event* <format>::
Specify a format to control the output of events in non-interactive mode. See
the 'FORMAT STRINGS' section for detailed information on format strings.
*--format-recur-event* <format>::
Specify a format to control the output of recurrent events in non-interactive
mode. See the 'FORMAT STRINGS' section for detailed information on format
strings.
*--format-todo* <format>::
Specify a format to control the output of todo items in non-interactive mode.
See the 'FORMAT STRINGS' section for detailed information on format strings.
Format strings
--------------
Format strings are composed of printf()-style format specifiers -- ordinary
characters are copied to stdout without modification. Each specifier is
introduced by a *%* and is followed by a character which specifies the field to
print. The set of available fields depends on the item type.
Format specifiers for appointments
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*s*::
Print the start time of the appointment as UNIX time stamp
*S*::
Print the start time of the appointment using the *hh:mm* format
*d*::
Print the duration of the appointment in seconds
*e*::
Print the end time of the appointment as UNIX time stamp
*E*::
Print the end time of the appointment using the *hh:mm* format
*m*::
Print the description of the item
*n*::
Print the name of the note file belonging to the item
*N*::
Print the note belonging to the item
Format specifiers for events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*m*::
Print the description of the item
*n*::
Print the name of the note file belonging to the item
*N*::
Print the note belonging to the item
Format specifiers for todo items
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*p*::
Print the priority of the item
*m*::
Print the description of the item
*n*::
Print the name of the note file belonging to the item
*N*::
Print the note belonging to the item
Examples
~~~~~~~~
*`calcurse -r7 --format-apt='- %S -> %E\n\t%m\n%N'`*::
Print appointments and events for the next seven days. Also, print the notes
attached to each regular appointment (simulates *-N* for appointments).
*`calcurse -r7 --format-apt=' - %m (%S to %E)\n' --format-recur-apt=' - %m (%S to %E)\n'`*::
Print appointments and events for the next seven days and use a custom format
for (recurrent) appointments: * - Some appointment (18:30 to 21:30)*.
*`calcurse -t --format-todo '(%p) %m\n'`*::
List all todo items and put parentheses around the priority specifiers.
Extended format specifiers
~~~~~~~~~~~~~~~~~~~~~~~~~~
Extended format specifiers can be used if you want to specify advanced
formatting options. Extended specifiers are introduced by *%(* and are
terminated by a closing parenthesis (*)*). The following list includes all
short specifiers and corresponding long options:
* *s*: *(start)*
* *S*: *(start:epoch)*
* *e*: *(end)*
* *E*: *(end:epoch)*
* *d*: *(duration)*
* *r*: *(remaining)*
* *m*: *(message)*
* *n*: *(noteid)*
* *N*: *(note)*
* *p*: *(priority)*
The *(start)* and *(end)* specifiers support strftime()-style extended
formatting options that can be used for fine-grained formatting. Additionally,
the special formats *epoch* (which is equivalent to *(start:%s)* or *(end:%s)*)
and *default* (which is mostly equivalent to *(start:%H:%M)* or *(end:%H:%M)*
but displays *..:..* if the item doesn't start/end at the current day) are
supported.
The *(remaining)* and *(duration)* specifiers support a subset of the
strftime()-style formatting options, along with two extra qualifiers.
The supported options are *%d*, *%H*, *%M* and *%S*, and by default each
of these is zero-padded to two decimal places. To avoid the
zero-padding, add *-* in front of the formatting option (for example,
*%-d*). Additionally, the *E* option will display the total number of
time units until the appointment, rather than showing the remaining
number of time units modulo the next larger time unit. For example, an
appointment in 50 hours will show as 02:00 with the formatting string
*%H:%M*, but will show 50:00 with the formatting string *%EH:%M*. Note
that if you are combining the *-* and *E* options, the *-* must come
first. The default format for the *(remaining)* specifier is *%EH:%M*.
There are two additional long format specifiers that do not have any
corresponding short options. They can be used to print an item's hash or its
internal representation and were designed to be used for scripting:
* *(hash)*
* *(raw)*
Notes
-----
Calcurse interface contains three different panels (calendar, appointment list,
and todo list) on which you can perform different actions. All the possible
actions, together with their associated keystrokes, are listed on the status
bar. This status bar takes place at the bottom of the screen.
At any time, the built-in help system can be invoked by pressing the '?' key.
Once viewing the help screens, informations on a specific command can be
accessed by pressing the keystroke corresponding to that command.
Configuration
-------------
The calcurse options can be changed from the configuration menu (shown when 'C'
is hit). Five possible categories are to be chosen from : the color scheme, the
layout (the location of the three panels on the screen), notification options,
key bindings configuration menu, and more general options (such as automatic
save before quitting). All of these options are detailed in the configuration
menu.
Files
-----
The following structure is created in your $HOME directory (or in the directory
you specified with the *-D* option), the first time calcurse is run:
----
$HOME/.calcurse/
|___notes/
|___conf
|___keys
|___apts
|___todo
----
The 'notes' subdirectory contains descriptions of the notes which are attached
to appointments, events or todos. One text file is created per note, whose name
is the SHA1 message digest of the note itself.
The 'conf' file contains the user configuration. The 'keys' file contains the
user-defined key bindings. The 'apts' file contains all of the user's
appointments and events, and the 'todo' file contains the todo list.
'Note:' if the logging of calcurse daemon activity was set in the notification
configuration menu, the extra file 'daemon.log' will appear in calcurse data
directory. This file contains logs about calcurse activity when running in
background.
Environment
-----------
This section describes the environment variables that affect how calcurse
operates.
*VISUAL*::
Specifies the external editor to use for writing notes.
*EDITOR*::
If the 'VISUAL' environment variable is not set, then 'EDITOR' will be used
as the default external editor. If none of those variables are set, then
'/usr/bin/vi' is used instead.
*PAGER*::
Specifies the default viewer to be used for reading notes. If this variable
is not set, then '/usr/bin/less' is used.
Bugs
----
Incorrect highlighting of items appear when using calcurse black and white
theme together with a *$TERM* variable set to 'xterm-color'. To fix this bug,
and as advised by Thomas E. Dickey (xterm maintainer), 'xterm-xfree86' should
be used instead of 'xterm-color' to set the *$TERM* variable:
"The xterm-color value for $TERM is a bad choice for
XFree86 xterm because it is commonly used for a
terminfo entry which happens to not support bce.
Use the xterm-xfree86 entry which is distributed
with XFree86 xterm (or the similar one distributed
with ncurses)."
If you find other bugs, please send a report to bugs@calcurse.org or to one of
the authors, below.
See also
--------
vi(1), less(1), ncurses(3), mkstemp(3)
The ical specification (rfc2445) can be found at:
http://tools.ietf.org/html/rfc2445
The pcal project page: http://pcal.sourceforge.net/
Calcurse home page: http://calcurse.org/
Calcurse complete manual, translated in many languages and maintained in
html format, can be found in the doc/ directory of the source package,
or at: http://calcurse.org/files/manual.html
Authors
-------
* *Frederic Culot* <frederic@culot.org>
* *Lukas Fleischer* <lfleischer@calcurse.org>
Copyright
---------
Copyright (c) 2004-2015 calcurse Development Team.
This software is released under the BSD License.
