//// /* * Copyright (c) 2004-2013 calcurse Development Team * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the * following disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the * following disclaimer in the documentation and/or other * materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ //// calcurse(1) =========== Name ---- calcurse - text-based organizer Synopsis -------- [verse] *calcurse* [*-h*|*-v*] [*-an*] [*-t*[num]] [*-c*] [*-D*] [*-i*] [*-x*[format]] [*-d* |] [*-s*[date]] [*-l* ] [*-r*[range]] [*-S* ] [*--status*] Description ----------- Calcurse is a text-based calendar and scheduling application. It helps keeping track of events, appointments and everyday tasks. A configurable notification system reminds user of upcoming deadlines, and the curses based interface can be customized to suit user needs. All of the commands are documented within an online help system. Options ------- The following options are supported: *-a*, *--appointment*:: Print the appointments and events for the current day and exit. 'Note:' The calendar from which to read the appointments can be specified using the *-c* flag. *-c* , *--calendar* :: Specify the calendar file to use. The default calendar is *~/.calcurse/apts* (see section 'FILES' below). This option has precedence over *-D*. *-d* , *--day* :: Print the appointments for the given date or for the given number of upcoming days, depending on the argument format. Two possible formats are supported: + -- * a date (possible formats described below). * a number *n*. -- + In the first case, the appointment list for the specified date will be returned, while in the second case the appointment list for the *n* upcoming days will be returned. + As an example, typing *calcurse -d 3* will display your appointments for today, tomorrow, and the day after tomorrow. + The date format used is the one specified in the ``General options'' menu. Four formats are available: + -- 1. mm/dd/yyyy 2. dd/mm/yyyy 3. yyyy/mm/dd 4. yyyy-mm-dd -- + 'Note:' as for the *-a* flag, the calendar from which to read the appointments can be specified using the *-c* flag. *-D* , *--directory* :: Specify the data directory to use. If not specified, the default directory is *~/.calcurse/*. *--format-apt* :: Specify a format to control the output of appointments in non-interactive mode. See the 'FORMAT STRINGS' section for detailed information on format strings. *--format-recur-apt* :: Specify a format to control the output of recurrent appointments in non-interactive mode. See the 'FORMAT STRINGS' section for detailed information on format strings. *--format-event* :: Specify a format to control the output of events in non-interactive mode. See the 'FORMAT STRINGS' section for detailed information on format strings. *--format-recur-event* :: Specify a format to control the output of recurrent events in non-interactive mode. See the 'FORMAT STRINGS' section for detailed information on format strings. *--format-todo* :: Specify a format to control the output of todo items in non-interactive mode. See the 'FORMAT STRINGS' section for detailed information on format strings. *-g*, *--gc*:: Run the garbage collector for note files and exit. *-h*, *--help*:: Print a short help text describing the supported command-line options, and exit. *-i* , *--import* :: Import the icalendar data contained in 'file'. *-l* , *--limit* :: Limit the number of results printed to 'num'. *-n*, *--next*:: Print the next appointment within upcoming 24 hours and exit. The indicated time is the number of hours and minutes left before this appointment. + 'Note:' the calendar from which to read the appointments can be specified using the *-c* flag. *-r*[num], *--range*[=num]:: Print events and appointments for the 'num' number of days and exit. If no 'num' is given, a range of 1 day is considered. *--read-only*:: Don't save configuration nor appointments/todos. + 'Warning:' Use this this with care! If you run an interactive calcurse instance in read-only mode, all changes from this session will be lost without warning! *-s*[date], *--startday*[=date]:: Print events and appointments from 'date' and exit. If no 'date' is given, the current day is considered. *-S*, *--search*=:: When used with the *-a*, *-d*, *-r*, *-s*, or *-t* flag, print only the items having a description that matches the given regular expression. *--status*:: Display the status of running instances of calcurse. If calcurse is running, this will tell if the interactive mode was launched or if calcurse is running in background. The process pid will also be indicated. *-t*[num], *--todo*[=num]:: Print the *todo* list and exit. If the optional number 'num' is given, then only todos having a priority equal to 'num' will be returned. The priority number must be between 1 (highest) and 9 (lowest). It is also possible to specify *0* for the priority, in which case only completed tasks will be shown. *-v*, *--version*:: Display *calcurse* version and exit. *-x*[format], *--export*[=format]:: Export user data to specified format. Events, appointments and todos are converted and echoed to stdout. Two possible formats are available: 'ical' and 'pcal'. If the optional argument 'format' is not given, ical format is selected by default. + 'Note:' redirect standard output to export data to a file, by issuing a command such as: + ---- $ calcurse --export > my_data.dat ---- 'Note:' The *-N* option has been removed in calcurse 3.0.0. See the 'FORMAT STRINGS' section on how to print note along with appointments and events. Format strings -------------- Format strings are composed of printf()-style format specifiers -- ordinary characters are copied to stdout without modification. Each specifier is introduced by a *%* and is followed by a character which specifies the field to print. The set of available fields depends on the item type. Format specifiers for appointments ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *s*:: Print the start time of the appointment as UNIX time stamp *S*:: Print the start time of the appointment using the *hh:mm* format *d*:: Print the duration of the appointment in seconds *e*:: Print the end time of the appointment as UNIX time stamp *E*:: Print the end time of the appointment using the *hh:mm* format *m*:: Print the description of the item *n*:: Print the name of the note file belonging to the item *N*:: Print the note belonging to the item Format specifiers for events ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *m*:: Print the description of the item *n*:: Print the name of the note file belonging to the item *N*:: Print the note belonging to the item Format specifiers for todo items ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *p*:: Print the priority of the item *m*:: Print the description of the item *n*:: Print the name of the note file belonging to the item *N*:: Print the note belonging to the item Examples ~~~~~~~~ *`calcurse -r7 --format-apt='- %S -> %E\n\t%m\n%N'`*:: Print appointments and events for the next seven days. Also, print the notes attached to each regular appointment (simulates *-N* for appointments). *`calcurse -r7 --format-apt=' - %m (%S to %E)\n' --format-recur-apt=' - %m (%S to %E)\n'`*:: Print appointments and events for the next seven days and use a custom format for (recurrent) appointments: * - Some appointment (18:30 to 21:30)*. *`calcurse -t --format-todo '(%p) %m\n'`*:: List all todo items and put parentheses around the priority specifiers. Extended format specifiers ~~~~~~~~~~~~~~~~~~~~~~~~~~ Extended format specifiers can be used if you want to specify advanced formatting options. Extended specifiers are introduced by *%(* and are terminated by a closing parenthesis (*)*). The following list includes all short specifiers and corresponding long options: * *s*: *(start)* * *S*: *(start:epoch)* * *e*: *(end)* * *E*: *(end:epoch)* * *d*: *(duration)* * *r*: *(remaining)* * *m*: *(message)* * *n*: *(noteid)* * *N*: *(note)* * *p*: *(priority)* The *(start)* and *(end)* specifiers support strftime()-style extended formatting options that can be used for fine-grained formatting. Additionally, the special formats *epoch* (which is equivalent to *(start:%s)* or *(end:%s)*) and *default* (which is mostly equivalent to *(start:%H:%M)* or *(end:%H:%M)* but displays *..:..* if the item doesn't start/end at the current day) are supported. The *(remaining)* and *(duration)* specifiers support a subset of the strftime()-style formatting options, along with two extra qualifiers. The supported options are *%d*, *%H*, *%M* and *%S*, and by default each of these is zero-padded to two decimal places. To avoid the zero-padding, add *-* in front of the formatting option (for example, *%-d*). Additionally, the *E* option will display the total number of time units until the appointment, rather than showing the remaining number of time units modulo the next larger time unit. For example, an appointment in 50 hours will show as 02:00 with the formatting string *%H:%M*, but will show 50:00 with the formatting string *%EH:%M*. Note that if you are combining the *-* and *E* options, the *-* must come first. The default format for the *(remaining)* specifier is *%EH:%M*. Notes ----- Calcurse interface contains three different panels (calendar, appointment list, and todo list) on which you can perform different actions. All the possible actions, together with their associated keystrokes, are listed on the status bar. This status bar takes place at the bottom of the screen. At any time, the built-in help system can be invoked by pressing the '?' key. Once viewing the help screens, informations on a specific command can be accessed by pressing the keystroke corresponding to that command. Configuration ------------- The calcurse options can be changed from the configuration menu (shown when 'C' is hit). Five possible categories are to be chosen from : the color scheme, the layout (the location of the three panels on the screen), notification options, key bindings configuration menu, and more general options (such as automatic save before quitting). All of these options are detailed in the configuration menu. Files ----- The following structure is created in your $HOME directory (or in the directory you specified with the *-D* option), the first time calcurse is run: ---- $HOME/.calcurse/ |___notes/ |___conf |___keys |___apts |___todo ---- The 'notes' subdirectory contains descriptions of the notes which are attached to appointments, events or todos. One text file is created per note, whose name is built using mkstemp(3) and should be unique, but with no relation with the corresponding item's description. The 'conf' file contains the user configuration. The 'keys' file contains the user-defined key bindings. The 'apts' file contains all of the user's appointments and events, and the 'todo' file contains the todo list. 'Note:' if the logging of calcurse daemon activity was set in the notification configuration menu, the extra file 'daemon.log' will appear in calcurse data directory. This file contains logs about calcurse activity when running in background. Environment ----------- This section describes the environment variables that affect how calcurse operates. *VISUAL*:: Specifies the external editor to use for writing notes. *EDITOR*:: If the 'VISUAL' environment variable is not set, then 'EDITOR' will be used as the default external editor. If none of those variables are set, then '/usr/bin/vi' is used instead. *PAGER*:: Specifies the default viewer to be used for reading notes. If this variable is not set, then '/usr/bin/less' is used. Bugs ---- Incorrect highlighting of items appear when using calcurse black and white theme together with a *$TERM* variable set to 'xterm-color'. To fix this bug, and as advised by Thomas E. Dickey (xterm maintainer), 'xterm-xfree86' should be used instead of 'xterm-color' to set the *$TERM* variable: "The xterm-color value for $TERM is a bad choice for XFree86 xterm because it is commonly used for a terminfo entry which happens to not support bce. Use the xterm-xfree86 entry which is distributed with XFree86 xterm (or the similar one distributed with ncurses)." If you find other bugs, please send a report to bugs@calcurse.org or to one of the authors, below. See also -------- vi(1), less(1), ncurses(3), mkstemp(3) The ical specification (rfc2445) can be found at: http://tools.ietf.org/html/rfc2445 The pcal project page: http://pcal.sourceforge.net/ Calcurse home page: http://calcurse.org/ Calcurse complete manual, translated in many languages and maintained in html format, can be found in the doc/ directory of the source package, or at: http://calcurse.org/files/manual.html Authors ------- * *Frederic Culot* * *Lukas Fleischer* Copyright --------- Copyright (c) 2004-2013 calcurse Development Team. This software is released under the BSD License.